Gear motor with worm screw and standard motor Ø 52 12 or 24 Vdc 2000 RPM output 40W, with noise suppressor. Starting corrent 6 A. (11A x 12Vdc) Driving shaft mounted on two bearing Output shaft supported by two bearings. Design to give low RPM in little dimension. *The rotation speed can change of ±10%. The S1 load test was made using a corrent in the air with an increase of temperature of 70 C°. The S2 load test was made using a corrent in the air with a 50% timing 5’ with an increase of temperature of 80 C° max. The starting corrent is I max cannot be maintained for more than 2′. Max forces wich may act on the output shaft: Axial 300 N, Radial 400 N. It is possible to apply an encoder.
Технические характеристики
CharacteristicsMotor typeDCTypewormShaft orientationright anglePower10 W…50 WVoltage 12 V, 24 VTorque10 — 20 Nm, 20 — 50 Nm, 50 — 100 Nm, 5 — 10 NmProduct applicationsindustrialOther characteristicscompact, low-noise
