Working Stroke [mm]: — 0 Throat [mm]: — 80 Troat [mm]: — 0 T-slot [mm] similar to DIN 650: — 12 Ram bore Øxdepth [mm]: — 10H7 x 25 Ram Ø [mm] / Surface F [mm²]: — 25 Space required CxG [mm]: — 157 x 237 mäder rack-and-pinion presses transmit their pressing force constantly over the entire length of the stroke. Direct power transmission via the hand lever permits extreme precision in the pressing operation. The hand lever with ergonomic be fixed through 360°: Adaptable for any body size and application. Lever us angled to the side in an ergonomically comfortable position: this allows free view of work area. The R/L version of Rack-and-pinion presses allow simple and easy conversion for lefthanders without losing the tool setting. Ideal for job sharing on one press. The round ram of mäder pressen is characterized by high sturdiness, ground surface and precise ram bore. Tools can be fixed securely in the ram bore by means of a fixation screw. Round rams of mäder pressen are either guided in precision honed bores or in precise Teflon bushings. mäder APZ type rack-and-pinion presses are available with capacities of 1.5 kN and 2.5 kN and two different lengths of stroke. They have spespecially be designed for serial or individual manufacture in manual workstations. The manual force of 120 N to be applied is user-friendly. As many applications require less force, fatigue-free working is possible even with serial production. Throat is either 63 mm or 80 mm. Depending from the model the working height is steplessly adjustable from 40 mm to 390 mm.
Технические характеристики
CharacteristicsOperationmanual, rack-and-pinion, screwFunctionpunchingStructureram, round ramOther characteristicsfixedForce
2.5 kN
Stroke
50 mm (2 in)
Table width
115 mm (5 in)
Table length
157 mm (6 in)
Weight
21 kg (46 lb)
