The Bostik FP350 Graphite Plate is a pre-formed selfadhesive intumescent plate used to reinstate the fire resistance performance of flexible wall constructions where they are penetrated by plastic wall / socket boxes. Bostik FP350 Graphite Plate immediately reacts to fire through heat and rapidly expands and fills the box, limiting fire and smoke from passing through. It is also tested with cable and conduits connected to the socket box to prevent the passage of smoke and fire through the electrical conduits between socket boxes. Bostik FP350 Graphite Plate will reinstate the fire resistance performance of flexible wall constructions for up to 120 minutes. LIMITATIONS — Bostik FP350 Graphite Plate is not recommended for application on substrates that can exude oils, plasticizers or solvents. Also not recommended for underwater applications. — Flexible walls must have a minimum thickness of 75 mm and comprise of steel studs or timber studs lined on both faces, with a minimum of 1 layer of 12.5mm thick board. — When using timber studs, no part of the penetration seal may be closer than 100mm to a stud and minimum 100 mm of insulation of class A1 or A2 according to EN 13501-1 must be provided within the cavity between the penetration seal and the stud. CE-marked Fast expanding graphite material Ready to fit Very quick and easy to install Allows wall boxes to be fitted back to back CE marked to ETAG 026-2 Fast expanding graphite material For flexible walls with a minimum thickness of 75 mm Can be used on insulated and uninsulated walls
Технические характеристики
CharacteristicsMaterialgraphiteMountingwall-mounted
