Additional Features:
- 45 MHz to 26.5 GHz Reflection Transmission test set
- One bridge for making reflection (S11) and transmission (S21) measurements
- Three RF to IF converters
- No step attenuators to internally change the incident power level
- No bias tees to apply external DC bias to the test poort center conductors
Test Ports (Front Panel)
- Connector Type: precision 3.5 mm male
- Impedance: 540 ohms nominal
- Damage input level: Port 1: >,+20 dBm, Port 2: >,+13 dBm
- Nominal connector size: 20 mm
- Recommended torque: 90 n-cm
Nominal operating power level:
- 0.045 to 8 GHz: -5dBm
- 8 to 20 GHz: -10 dBm
- 20 to 26.5 GHz: -25 dBm
RF Input Connector (Rear Panel)
- Connector type: precision 3.5 mm female
- Damage input level: +23 dBm
- Source power levels for reference channel phase lock: Minimum: -2 dBm, Maximum: +12 dBm
- Nominal connector nut size: 8 mm
- Recommended torque: Precision 3.5mm: 90 n-cm, SMA: 56 n-cm
Power requirements and Physical Characteristics
- Operating temperature: 0°C to 55°C
- Power: 110, 120, 220 or 240 ±10% Vac, 47 to 66 Hz line frequency
- Dimensions: 460 mm x 133 mm x 610 mm (18.1 x 5.25 x 24 inches)
The 8513A is designed to operate specifically with the Agilent 8510 network analyzer. The combination of the Agilent 8513A Test Set with the Agilent 8510 network analyzer and source provides a system for making S-parameter measurements over the frequency range of 45 MHz to 26.5 GHz. This system is suited for making all four S-parameter measurements on two port devices without physically reversing the DUT (device under test).
Технические характеристики
| Manufacturer | Agilent, HP, Keysight |
|---|---|
| Condition | Used |
