54718A Цифровой осциллограф Agilent

Additional Features:

Specifications

• Trigger Sensitivity
• Normal Sensitivity: 30 mV p-p at 100 MHz, 90 mV p-p at 1 GHz
• Noise Reject: 60 mV p-p at 100 MHz, 150 mV p-p at 1 GHz
• Minimum Pulse Width at Normal Sensitivity: &lt,/= 500 ps at &gt,/= 60 mV p-p

Characteristics

• High Sensitivity: 6 mV p-p at 100 MHz, 20 mV p-p at 1 GHz
• Input Resistance: 50 Ω
• Input Connector: BNC (f)
• RMS Jitter: &lt,6 ps +/- 0.005% of delay setting
• Trigger Level Range: +/- 1 V
• Max Safe Input Voltage: +/- 1.5 V
• Probe Power

The Agilent 54718A is a Trigger plug-in that can be used in the trigger-only slots of the Agilent 54710A. The 54718A can also be used in any slot of the Agilent 54720A Mainframe.

The main use for the Agilent 54718A Trigger plug-in is to provide access to the triggers in slots 3 and 4 of the Agilent 54710A Oscilloscope mainframe. These slots do not have channels because the Agilent 54710A mainframe has only one acquisition board. Slots 3 and 4 have fully functioning triggers because the triggering circuitry is on the time base assembly, which is the same in both the Agilent 54710A and 54720A. The Agilent 54718A provides the additional trigger for these slots, without the expense of a full featured plug-in. The trigger path in the Agilent 54718A is identical to the external trigger in the Agilent 54721A amplifier plug-in. A probe power connection is provided for the use of an active probe.

Технические характеристики