- multi-axis positioning systems possible by simple combination of stages
- two high-precision pillar guides mounted on sides guarantee high guidance stability
- high-precision trapezoidal spindle drive with smoothed and tempered spindle (self-locking)
- four spindle lifting gear drives interconnected by a linking shaft
- robust surfaces through galvanic anodisation
- maximum system resolution increased by a reduction transmission
- four height-adjustable feet for table alignment
- two precision configurations
Modularly individually configurable:
- various dimensions available
- from basic model to high-end systems
- to multi-axis systems
- with individual travel range
- with costumer-specific hole pattern
Specifications:
Travel range [mm]: | 120* |
Material (housing/plates): | Aluminium |
Resolution [µm]: | 0.125 |
Max. load [N]: | 5000 |
Min. drive torque [Nm]: | 1.5 |
Weight [kg]: | 73 |
* optional: extended or shortened travel range
Precision configurations:
 |  | ||
Accuracy [µm]: | (+/-) | 15 | on request |
Repeatability (unidir.) [µm]: | (+/-) | 3 | on request |
Reversal error [µm]: | 3 | on request | |
Flatness [µm]: | (+/-) | 20 | 20 |
Straightness [µm]: | (+/-) | 20 | 20 |
Yaw [«]: | (+/-) | 2 | 2 |
Pitch [«]: | (+/-) | 2 | 3 |
Roll [«]: | (+/-) | 4 | 4 |
Maximum load:
A general statementof maximum load and torque capacities is not possible for eccentric forces due to the amount of different configurations.
However, our engineers will gladly calculate the maximum load capacity for your specific application.
Dimensions [mm]:
A: | B: | H1: | H2: |
540 | 540 | 158 | 158+120 |
Accessories:
Motors: | 2-/3-/5-Ph. |
Servo/DC | |
Hand wheels: | 0083 |
Gearboxes: | 2083.05 |
2083.10 | |
2083.20 | |
Limit Switches: | included |
Zero point control: | 9100 |
Encoder : | incremental |
absolute | |
Steuerung: | 9300 |
