The ATEX pump series has been specially designed for transferring potentially explosive atmospheres of fluids such as water, gasoline, diesel, alcohol, toluene, trichlorethylene, acetone and white spirit. Pumps designed for the transfer of aggressive and/or viscous liquids. Plastic pumps are recommended for strong acids and for bases. Dry self-priming pumps. The priming height varies depending on whether the pump is dry or wet. Flow rate adjustable by adjusting the pressure and the air flow (see accessories). In case of dry running, the pump continues to run without overheating or wear. If the pumping of liquid is stopped, the pump stops automatically without getting damaged. Characteristics More Information FLUID Adblue, Water, Oil, Windscreen fluid / Cooling liquid, Solvent TECHNOLOGY Membrane ATEX Yes PUMP MARKING Ex II2 GD IIB/IIC 95°C PUMP Bare MAX FLOW RATE 50l/min ORIFICE 1/2’’ MATERIALS Conductive PP BALLS PTFE SOCKETS Stainless steel OTHER CONTACT PARTS Stainless steel MAX. VISCOSITY 5000 cPo PRESSURE 7 bars DRY MEMBRANE 6 m WET MEMBRANE 8 m AIR CONSUMPTION from 3 to 22 Nm3/h MEMBRANE PTFE PARTICLES 3 mm
Технические характеристики
CharacteristicsFluidwater, acid, for solvents, for bases, oilOperationpneumaticPrimingself-primingTechnologydiaphragmDomainindustrialApplicationssuction, transferMaterialEPDM, PTFEFluid specificationfor viscous fluidsProtection levelATEXOther characteristicsdryFlow
50 l/min (13.2086 us gal/min)
Pressure
7 bar (101.526 psi)
