The ATEX pump series has been specially designed for transferring potentially explosive atmospheres of fluids such as water, gasoline, diesel, alcohol, toluene, trichlorethylene, acetone and white spirit. Construction materials Body: Stainless steel Membranes: PTFE Specifications and advantages: Suitable for the transfer of aggressive and/or viscous liquids. Metal pumps are significantly resistant to solvents, hydrocarbons, etc. Dry self-priming. The priming height varies depending on whether the pump is dry or wet. Flow rate adjustable by adjusting the pressure and the air flow (see accessories). In case of dry running, the pump continues to run without overheating or wear. If the pumping of liquid is stopped, the pump stops automatically without getting damaged. Characteristics More Information FLUID Acid, Water, Petrol, Diesel, Oil, Solvent TECHNOLOGY Membrane ATEX Yes PUMP MARKING Ex II2 GD IIB/IIC 95°C PUMP Bare MAX FLOW RATE 50l/min ORIFICE 1/2’’ MATERIALS Stainless steel BALLS PTFE SOCKETS Stainless steel MAX. VISCOSITY 5000 cPo PRESSURE 7 bars DRY MEMBRANE 6 m WET MEMBRANE 8 m AIR CONSUMPTION from 3 to 22 Nm3/h MEMBRANE PTFE PARTICLES 3 mm
Технические характеристики
CharacteristicsFluidwater, acid, for solvents, oil, for dieselOperationpneumaticPrimingself-primingTechnologydiaphragmDomainindustrialApplicationsfor transferMaterialEPDM, PTFEFluid specificationfor aggressive media, for viscous fluidsProtection levelATEXOther characteristicsdry, adjustableFlow
50 l/min (13.2086 us gal/min)
Pressure
7 bar (101.526 psi)
