The M-UTR80S Precision Low-Profile Metric Rotation Stage is ideal for ±2° fine-tuning angular orientation of any component after rotating it to an approximate angle. Cross-roller bearings are preloaded in precision-ground, tool steel races for a smooth, accurate trajectory with minimum eccentricity. Disengaging the side-mounted clutch knob permits continuous 360° free rotation. Once the approximate angular orientation is obtained, a zero-backlash manual drive provides a fine adjustment of 4°. Scale markings and a vernier on the side of the rotation stage measure angular position with 1 arc min resolution.
Технические характеристики
- Coarse Travel 360°
- Fine Travel 4°
- Diameter 79 mm
- Height 23 mm
- Load Capacity 200 N
- Sensitivity 4 arc sec
- Thread Type M4 and M6
- Material Steel
- Graduations 1°
- Vernier 1 arc min
- Maximum Drive Torque 1.3 Nm
- Maximum Reverse Drive Torque 0.4 Nm
- Resolution 0.017°
- Transverse Stiffness 30 rad/Nm
- Wobble ±60 rad
- Weight 0.8 kg
- Included Actuators Adjustment Screw
- Included Bridles M-BR42
