OPTOCOUPLED STATIC OUTPUTS • 1 or 2 channels • General Features: These units allow to amplifiy signals from NAMUR sensors or contacts. Each output is electrically insulated from each other, from power supply and from all the inputs. It is possible to configure them as N.O. or N.C. and use them as PNP or NPN. They are protected against over voltages on lines, overload and short circuit. When used for NAMUR sensors, the indication of failures is visible with a red LED on the front panel for interruptions or short circuits on the input lines. The configuration dip-switches are easily accessible removing the front panel. Suitable for DIN rail mounting. Technical data: • Supply voltage: see ordering references • Frequency of power supply: DC or 50 — 60 Hz • Power consumption max: see ordering references • Working temperature: — 25 ÷ + 60°C • Storage temperature: — 40 ÷ + 80°C • According to EN60947-5-6 • Electromagnetic compatibility (EMC) according to EN61000-6-2/-4 • Degree of protection: IP20 INPUT PARAMETERS • Switching point to ON: 1,55 ÷ 1,75 mA • Switching point hysteresis: 0,2 mA • Failure detection thresholds: open circuit detection when I 7,45 mA (Ri
Технические характеристики
CharacteristicsTypesignalOther characteristicselectronic, for sensors, DIN rail, single-channel, 2-channelVoltage
Min.: 24 V
Max.: 260 V
Current
300 mA
