Specification:
| Part Number: 1061040 |
| Housing material, wire draw mechanism: Plastic, Noryl |
| Initialization time: Ca. 50 ms |
| SET (electronic adjustment): Via SET cable |
| Number of steps per revolution: 8,192 |
| Resolution (wire draw + encoder): 0.07 mm |
| Mounted mechanic: MRA-G190-110D3 |
| Part number mechanic: 5326242 |
| Linearity: ≤ ± 2 mm |
| Enclosure rating mechanic: IP 50 |
| Mass (including encoder): 2.16 kg |
| Resistance to vibration: 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Measuring wire material: Highly flexible stranded steel 1.4401 stainless steel V4A |
| Supply voltage: 4.5 V … 32 V |
| Part number encoder: 1037863 |
| MTTFd: mean time to dangerous failure: 250 a |
| Wire acceleration: 8 m/s? |
| Operating speed: 4 m/s |
| Working temperature range (mechanics): -30 °C … +70 °C |
| Measuring wire diameter: 0.55 mm |
| Code type: Gray |
| Working temperature range (combination): Defined by the higher minimum and lower maximum values of the working temperature range of the encoder and the mechanics. |
| Electrical interface: SSI |
| Actual length of cable extension: 10.2 m |
| Clock frequency: 1 MHz 2 MHz |
| Resistance to shocks: 70 g, 6 ms (according to EN 60068-2-27) |
| Life of wire draw mechanism: 1 million cycles |
| Relative humidity / Condensation: 90 % (condensation of the optical scanning not permitted) |
| Mass (mechanics): 1.9 kg |
| Hysteresis: ≤ 0.4 mm |
| Length of wire pulled out per revolution: 555 mm |
| Enclosure rating encoder: IP 67 |
| Spring return force: Ca. 9 N … ca. 12 N |
| EMC: (according to EN 61000-6-2 and EN 61000-6-3) |
| Power consumption: 0.7 W |
| Mass (measuring wire): 1.2 g/m |
| Encoder: Absolute encoders |
| Mounted encoder: AFM60 SSI |
| Repeatability: ≤ 0.2 mm |
| Connection type: Male connector M12, 8-pin, radial |
| Working temperature range (encoder): -30 °C … +70 °C, with AFM60B, 0 °C … +70 °C, with AFM60E |
| Measuring range: 0 m … 10 m |
