Part Number: 1031448.
Основные характеристики:
Resistance to vibration: 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6).
Max. angular acceleration: 500,000 rad/s?.
Repeat accuracy: 0.005 °.
Operation of zero-set: ≥ 100 ms.
Resistance to shocks: 50 g (according to EN 60068-2-27).
Start up torque: 0.4 Ncm.
Mechanical interface: Solid shaft, Face mount flange.
Operating voltage range: 10 V DC … 32 V DC.
Operating power consumption (no load): 60 mA.
Operating torque: 0.3 Ncm.
Error limits: 0.035 ° (binary number of steps), 0.046 ° (non-binary number of steps).
Resolution power: 8,192 x 1.
Storage temperature range: -40 °C … 100 °C.
Maximum operating speed: 10,000 /min (without shaft seal), 6,000 /min (with shaft seal).
Initialization time: 80 ms.
Measuring step deviation: 0.005 °, 0.016 °.
Shaft diameter: 10 mm.
Permissible relative humidity: 90 % (condensation of the optical scanning not permitted).
Moment of inertia of the rotor: 54 gcm?.
Permissible Load capacity of shaft: 20 N (radial), 10 N (axial).
Enclosure rating: IP 66, according to IEC 60529.
Bearing lifetime: 3.6 x 10^9 revolutions.
Electrical interface: Cable, 11-pin, radial, 1.5 m.
Max. number of revolutions: 1.
EMC: According to EN 61000-6-2 and EN 61000-6-3.
Working temperature range: -20 °C … 85 °C.
Measuring step: 360 ° /number of lines.
Max. number of steps per revolution: 8,192.
Specification:
| Part Number | 1031448 |
| Resistance to vibration: | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Max. angular acceleration: | 500,000 rad/s? |
| Repeat accuracy: | 0.005 ° |
| Operation of zero-set: | ≥ 100 ms |
| Resistance to shocks: | 50 g (according to EN 60068-2-27) |
| Start up torque: | 0.4 Ncm |
| Mechanical interface: | Solid shaft, Face mount flange |
| Operating voltage range: | 10 V DC … 32 V DC |
| Operating power consumption (no load): | 60 mA |
| Operating torque: | 0.3 Ncm |
| Error limits: | 0.035 ° (binary number of steps) 0.046 ° (non-binary number of steps) |
| Resolution power: | 8,192 x 1 |
| Storage temperature range: | -40 °C … 100 °C |
| Maximum operating speed: | 10,000 /min (without shaft seal) 6,000 /min (with shaft seal) |
| Initialization time: | 80 ms |
| Measuring step deviation: | 0.005 °, 0.016 ° |
| Shaft diameter: | 10 mm |
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
| Moment of inertia of the rotor: | 54 gcm? |
| Permissible Load capacity of shaft: | 20 N (radial) 10 N (axial) |
| Enclosure rating: | IP 66, according to IEC 60529 |
| Bearing lifetime: | 3.6 x 10^9 revolutions |
| Electrical interface: | Cable, 11-pin, radial, 1.5 m |
| Max. number of revolutions: | 1 |
| EMC: | According to EN 61000-6-2 and EN 61000-6-3 |
| Working temperature range: | -20 °C … 85 °C |
| Measuring step: | 360 ° /number of lines |
| Max. number of steps per revolution: | 8,192 |
