Specification:
| Part Number | 1056983 |
| Life of wire draw mechanism: | 1 million cycles |
| Mass (measuring wire): | 1.2 g/m |
| Working temperature range (encoder): | -20 °C … +70 °C, with AFM60B, 0 °C … +70 °C, with AFM60E |
| Number of steps per revolution: | 4,096 |
| Code type: | Gray |
| Repeatability: | ≤ 0.2 mm |
| Enclosure rating encoder: | IP 67 |
| Mass (mechanics): | 1.9 kg |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Operating speed: | 4 m/s |
| Measuring wire material: | Highly flexible stranded steel 1.4401 stainless steel V4A |
| Mounted mechanic: | MRA-G190-110D3 |
| Electrical interface: | SSI |
| SET (electronic adjustment): | Via SET cable |
| Measuring wire diameter: | 0.55 mm |
| Resistance to vibration: | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Housing material, wire draw mechanism: | Plastic, Noryl |
| Actual length of cable extension: | 10.2 m |
| Resistance to shocks: | 50 g, 6 ms (according to EN 60068-2-27) |
| Mounted encoder: | AFM60 SSI |
| Working temperature range (mechanics): | -30 °C … +70 °C |
| Measuring range: | 0 m … 10 m |
| Linearity: | ≤ ± 2 mm |
| Connection type: | Connector M23, 12-pin, radial |
| Part number encoder: | 1037868 |
| Supply voltage: | 4.5 V … 32 V |
| Spring return force: | Ca. 9 N … ca. 12 N |
| Clock frequency: | 1 MHz 2 MHz |
| Length of wire pulled out per revolution: | 555 mm |
| Wire acceleration: | 8 m/s? |
| Part number mechanic: | 5326242 |
| Encoder: | Absolute encoders |
| Relative humidity / Condensation: | 90 % (condensation of the optical scanning not permitted) |
| Hysteresis: | ≤ 0.4 mm |
| MTTFd: mean time to dangerous failure: | 250 a |
| Enclosure rating mechanic: | IP 50 |
| Resolution (wire draw + encoder): | 0.14 mm |
| Mass (including encoder): | 2.16 kg |
| Initialization time: | Ca. 50 ms |
| Working temperature range (combination): | Wird definiert durch den h?heren mininalen und niedrigeren maximalen Wert des Arbeitstemperaturbereichs von Encoder und Mechanik |
| Power consumption: | 0.7 W |
Технические характеристики:
* Part Number: 1056983
* Life of wire draw mechanism: 1 million cycles
* Mass (measuring wire): 1.2 g/m
* Working temperature range (encoder): -20 °C … +70 °C (с AFM60B: 0 °C … +70 °C, с AFM60E)
* Number of steps per revolution: 4,096
* Code type: Gray
* Repeatability: ≤ 0.2 mm
* Enclosure rating encoder: IP 67
* Mass (mechanics): 1.9 kg
* EMC: (согласно EN 61000-6-2 и EN 61000-6-3)
* Operating speed: 4 m/s
* Measuring wire material: Высокогибкая многожильная сталь 1.4401 нержавеющая сталь V4A
* Mounted mechanic: MRA-G190-110D3
* Electrical interface: SSI
* SET (electronic adjustment): Через кабель SET
* Measuring wire diameter: 0.55 mm
* Resistance to vibration: 20 g, 10 Hz … 2,000 Hz (согласно EN 60068-2-6)
* Housing material, wire draw mechanism: Пластик, Noryl
* Actual length of cable extension: 10.2 m
* Resistance to shocks: 50 g, 6 ms (согласно EN 60068-2-27)
* Mounted encoder: AFM60 SSI
* Working temperature range (mechanics): -30 °C … +70 °C
* Measuring range: 0 m … 10 m
* Linearity: ≤ ± 2 mm
* Connection type: Разъем M23, 12-контактный, радиальный
* Part number encoder: 1037868
* Supply voltage: 4.5 V … 32 V
* Spring return force: Примерно 9 Н … примерно 12 Н
* Clock frequency: 1 MHz / 2 MHz
* Length of wire pulled out per revolution: 555 mm
* Wire acceleration: 8 m/s²
* Part number mechanic: 5326242
* Encoder: Абсолютные энкодеры
* Relative humidity / Condensation: 90 % (конденсация оптического сканирования не допускается)
* Hysteresis: ≤ 0.4 mm
* MTTFd: mean time to dangerous failure: 250 a
* Enclosure rating mechanic: IP 50
* Resolution (wire draw + encoder): 0.14 mm
* Mass (including encoder): 2.16 kg
* Initialization time: Примерно 50 ms
* Working temperature range (combination): Определяется более высоким минимальным и более низким максимальным значением рабочего диапазона температур энкодера и механики.
* Power consumption: 0.7 W
