The UCP1B proximity probe is a lightweight and versatile instrument specifically designed to carry out underwater cathodic protection potential measurements. The probe has been developed for use with manned or Remotely Operated Vehicles (ROVs) and comes complete with 300 metres of cable. Each probe is supplied with a Certificate of Inspection and Conformity. By placing the UCP1B in close proximity to the surface under test, a voltage reading can be obtained on a suitable high impedance or digital voltmeter. The meter should be connected between the probe and a separate structure negative return. The UCP1B is extensively used in a wide range of applications including production and drilling platforms, ships’ hulls, jetties and other marine works. Options: UCP1B proximity probe 3m UCP1B proximity probe 50m UCP1B proximity probe 100m UCP1B proximity probe 200m UCP1B proximity probe 300m Features: Hard wearing DELRIN body Half Cell can be replaced Lightweight design Easy to use Suitable for fitting to manipulator arm Half-Cell specifications: Type: silver/silver chloride screw-in Output: ≈ +250mV VS SHE Temperature coeff: -0.6mV per °C Temperature range: 0 — 30 °C Working life: 1 to 2 years Probe specifications: Designed for use with remote voltmeter Minimum load impedance >10M Ohms Weight: 0.5Kg Size: 126mm long x 39mm diameter Underwater cable: 300m long x 9mm Packed weight (complete): 0.8Kg Dimensions (packed): 26cm x 14cm x 30cm This item is not depth rated as there are no pressure sensitive components within the assembly. Note: Due to ongoing technical developments, all stated information is typical and is subject to change without notice or obligation.
Технические характеристики
CharacteristicsTypereferenceMaterialglass, silverApplicationslaboratory
