The Rohde & Schwarz FPH is a robust handheld spectrum analyser. The frequency range of this spectrum analyser is standard 2 GHz and can be extended up to 4 GHz. The FPH handheld spectrum analyser is not too big, weighs 2.5 kg and the batteries last up to 8 hours, making it easy to transport. The typical noise experienced by this analyser is -145 dBm/Hz. The Rohde & Schwarz FSC series of spectrum analysers also offer the option of adding a pre-amplifier with a gain of 20 dB, so that the noise is only -163 dBm/Hz. Furthermore, the FPC1000 can be connected to a PC via USB and LAN connections. Of course it is also possible to store measurement data using a USB stick.
There are 2 options to increase the frequency range, namely the option from 2 to 3 GHz and the option from 3 to 4 GHz. You can check this option at the top right of the product. below and these options can also be ticked at the top right of the product. Specifications Display 7′ WVGA, 800 × 480 pixels Frequency 5 KHz — 2 GHz (option up to 4 GHz) Resolution 1 Hz Noise level Up to -145 dBm/Hz, with pre-amplifier (Option B22) down to -165 dBm/Hz. Third-order intercept (IP3) +7 dBm Maximum input voltage 50V DC Amplitude display
Log: 1 dB — 150 dB, 10 divisions
Linear: 0 — 100 %, 10 divisions
Connections USB 2.0 type A, mini B plug 2.0, Lan (10/100BASE-T, RJ-45) Battery life Up to 8 hours Weight 2.5 kg Dimensions 202 x 294 x 76 mm Software, firmware and drivers
The software, firmware and drivers of this spectrum analyser can be found at the manufacturer’s website on the right. Accessories
The Rohde & Schwarz FPH handheld spectrum analyser is supplied including:
- Power cord
- USB cable for PC connection
- Lithium-ion battery pack
- CD with Rohde & Schwarz Instrument View software, documentation and quick start guide
- Side strap (holding strap)
Options
There are some optional software functions available for this spectrum analyser. Below is a brief overview. The options can be ticked at the product, or added at a later time. FPH-B22 This option provides a preamplifier for the spectrum analyser. FPH-K7 This option makes it possible to perform analog modulation (AM and FM) analysis. FPH-K9 This option allows you to connect a power sensor to the FPH spectrum analyser. FPH-K19 This option allows the software to measure the power of the channels of FPH spectrum analyser moderately. FPH-K29 This option makes it possible to use the power sensor to perform pulse measurements. For this option the FPH-K9 is required. HA-Z220 A soft carrying case for your FPH handheld spectrum analyser.
