| Mission Time (TM) | 20 a |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Process data witdh | Process data input 2 Bit Process data output 2 Bit |
| Cable length | 0.3 m |
| Angle of divergence | approx. 5 ?° |
| No-load supply current | |
| Diameter of the light spot | approx. 170 mm at a distance of 3.5 m |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Housing height | 37.1 mm |
| Operation indicator | LED green: constantly on — power on flashing (4Hz) — short circuit flashing with short break (1 Hz) — IO-Link mode |
| Function indicator | Yellow LED: Permanently lit — light path clear Permanently off — object detected Flashing (4 Hz) — insufficient operating reserve |
| MTTFd | 600 a |
| Switching voltage | max. 30 V DC |
| Threshold detection range | 6 m |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Ripple | max. 10 % |
| Mass | approx. 17 g |
| Light type | modulated visible red light |
| Housing width | 11 mm |
| Degree of protection | IP67 / IP69 / IP69K |
| Control elements | 5-step rotary switch for operating modes selection |
| Reference target | H85-2 reflector |
| Device ID | 0x110A01 (1116673) |
| Ambient light limit | EN 60947-5-2 |
| LED risk group labelling | exempt group |
| Transfer rate | COM 2 (38.4 kBaud) |
| Product standard | EN 60947-5-2 |
| Response time | 1 ms |
| Ambient temperature | -20 … 60 ?°C (-4 … 140 ?°F) , movable cable not appropriate for conveyor chains |
| Protection class | III |
| Housing depth | 21.5 mm |
| Diagnostic Coverage (DC) | 0 % |
| Operating voltage | 10 … 30 V DC |
| Light source | LED |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q — Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q — Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Reflector distance | 0 … 3.5 m in TEACH mode ; 0 … 5 m at switch position «»N»» |
| Storage temperature | -40 … 70 ?°C (-40 … 158 ?°F) |
| Voltage drop | 1.5 V DC |
| SIO mode support | yes |
| Switching current | max. 100 mA , resistive load |
| Switching frequency | 500 Hz |
| Connection | fixed cable 300 mm with M8 x 1 male connector; 4-pin |
| Effective detection range | 0 … 3.5 m in TEACH mode ; 0 … 5 m at switch position «»N»» |
| Communication interface | IEC 61131-9 |
| Compatible master port type | A |
| Contrast detection levels | 10 % — clean, water filled PET bottles 18 % — clear glass bottles 40 % — colored glass or opaque materials Adjustable via rotary switch |
| Usage category | DC-12 and DC-13 |
| Min. cycle time | 2.3 ms |
| Control elements | Teach-In key |
| IO-Link Revision | 1.1 |
Buy Pepperl+Fuchs OBG5000-R100-2EP-IO-0,3M-V31 with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com is an online store of industrial automation equipment. Wе offer you a lot of spare parts that you cannot purchase on the market. We provide super fast delivery to any country. Become our partner and get great discounts. It is easy to make an order and to get the best quote. Send us a request and we will exceed your expectations.
