| Housing depth | 21.5 mm |
| Diagnostic Coverage (DC) | 0 % |
| Threshold detection range | 15 m |
| Device ID | Emitter: 0x110401 (1115137) Receiver: 0x110301 (1114881) |
| Communication interface | IEC 61131-9 |
| Mass | Emitter: approx. 10 g receiver: approx. 10 g |
| Diameter of the light spot | approx. 65 mm at a distance of 1 m |
| Ripple | max. 10 % |
| No-load supply current | Emitter: 14 mA Receiver: 13 mA at 24 V supply voltage |
| Storage temperature | -40 … 70 ?°C (-40 … 158 ?°F) |
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected |
| Degree of protection | IP67 / IP69 / IP69K |
| Control elements | Receiver: light/dark switch |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Effective detection range | 0 … 12 m |
| MTTFd | 462 a |
| Control elements | Receiver: sensitivity adjustment |
| Product standard | EN 60947-5-2 |
| Operating voltage | 10 … 30 V DC |
| Parameterization indicator | IO link communication: green LED goes out briefly (1 Hz) |
| Test input | emitter deactivation at +UB |
| Usage category | DC-12 and DC-13 |
| Switching frequency | 1000 Hz |
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q — Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q — Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
| Operation indicator | LED green: constantly on — power on flashing (4Hz) — short circuit flashing with short break (1 Hz) — IO-Link mode |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Receiver | OBE12M-R100-2EP-IO-0,3M-V1 |
| Process data witdh | Emitter: Process data output: 2 Bit Receiver: Process data input: 2 Bit Process data output: 2 Bit |
| Connection | 300 mm fixed cable with M12 x 1, 4-pin connector |
| Function indicator | Yellow LED: Permanently lit — light path clear Permanently off — object detected Flashing (4 Hz) — insufficient operating reserve |
| LED risk group labelling | exempt group |
| Ambient temperature | -40 … 60 ?°C (-40 … 140 ?°F) , fixed cable -25 … 60 ?°C (-13 … 140 ?°F) , movable cable not appropriate for conveyor chains |
| Cable length | 0.3 m |
| SIO mode support | yes |
| Housing width | 11 mm |
| Transfer rate | COM 2 (38.4 kBaud) |
| Angle of divergence | 3.7 ?° |
| Response time | 0.5 ms |
| Min. cycle time | 2.3 ms |
| Housing height | 37.1 mm |
| Emitter | OBE12M-R100-S-IO-0,3M-V1 |
| Light type | modulated visible red light |
| IO-Link Revision | 1.1 |
| Switching current | max. 100 mA , resistive load |
| Switching voltage | max. 30 V DC |
| Mission Time (TM) | 20 a |
| Ambient light limit | EN 60947-5-2 : 30000 Lux |
| Compatible master port type | A |
| Light source | LED |
| Protection class | III |
| Voltage drop | 1.5 V DC |
Buy Pepperl+Fuchs OBE12M-R100-S2EP-IO-0,3M-V1 with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com is an electrical parts online store. Our catalog includes pneumatic products, industrial sensors, controllers, low voltage equipment, drives, and motors, etc. We can provide you with the fastest delivery. When purchasing from our company, you receive quality products at the best prices. We will answer all your questions and help you to choose the right equipment. We do our work qualitatively and on time.
