The CONEX-AG-LS25-27P is a piezo motor linear stage integrated with a closed-loop piezo motor controller/driver. The compact Agilis™ AG-LS25-27P linear stage has a built-in direct read linear encoder enabling high position repeatability, for sample positioning, as an optics inserter, for focusing, etc. The innovation in this encoder technology allows the footprint to be maintained while delivering sub-micron bi-directional repeatability.
Based on the Agilis AG-LS25-27 linear stage, but featuring an innovative miniature direct read linear encoder, the linear stage is very compact, but is capable of 27 mm travel, and 0.2 &mu,m MIM.
The CONEX-AGP closed-loop algorithm combined with the direct read linear encoder, provides a system uni-directional repeatability of 0.2 &mu,m. For stability in-position, the user can adjust the dead band parameter that stops dithering when the stage is within a set position tolerance.
The CONEX-AGP is a very compact and inexpensive single axis motion controller and is delivered already pre-configured for the stage. The controller is accessible via USB, which also supplies power to the controller.
For OEM applications, an optional retainer to secure the USB and power cables is available. In addition, RS232 and RS485 communication is available at the board level.
Технические характеристики
- Stage Type AG-LS25-27P
- Travel Range 27 mm
- Axes of Travel X
- Maximum Speed 0.4 mm/s
- Minimum Incremental Motion 0.2 m
- Centered Load Capacity 2.5 N
- Vertical Load Capacity 1.5 N
- Holding Force 4 N
- Bearings Ball Bearings
- Uni-directional Repeatability, Typical 0.15 m
- Material Stainless Steel
- Bi-directional Repeatability, Typical 0.2 m
- Pitch, Typical 200 rad
- Compliance in Pitch 350 rad/Nm
- Yaw, Typical 100 rad
- Compliance in Yaw 300 rad/Nm
- Compliance in Roll 550 rad/Nm
- Drive Type Piezo motor
- Control Loop Digital PI loop at 100 kHz servo rate
- Display Two-color LED
- Programming 25+ intuitive, 2 letter ASCII commands. Includes SW limits, user units…
- Power Requirements 5 VDC from USB, 0.5A
- Operating Temperature 10 to 35°C
- Cable Length 1.8 m
