LM.F-HD-SST levelling elements for ground mounting are intended for use in environments where high hygiene is required and are certified according to EHEDG guidelines. The surface beneath the base is protected by rings that prevent dirt from entering, when the levelling element is mounted onto the supporting floor with screws through the holes provided in the element itself. The mounting and correct positioning of the holes is therefore essential for the sealing of the various rings. The adjustable protective sleeve, which covers the threaded part of the stem, is provided both at the top and bottom with a protective ring, as well as the base of the threaded stem. These rings prevent access to dirt inside the coupling between the threaded stud and the adjustable protective sleeve. The finish quality of stainless-steel parts prevents dirt adhering and facilitates cleaning. Fine turned AISI 304 stainless steel. Upper ring of the protective sleeve (GBS): NBR synthetic rubber hardness 70 +/-5 Shore A, blue colour, in compliance with FDA. Lower ring of the protective sleeve (GBI): Polyurethane elastomer TPU hardness 95 +/-5 Shore A, blue colour, in compliance with FDA. Stem ring (GST): H-NBR synthetic rubber hardness 85 +/-5 Shore A, blue colour, in compliance with FDA. Base ring (GBA): Silicone hardness 85 +/-5 Shore A, blue colour, in compliance with FDA.
Технические характеристики
CharacteristicsApplicationsmachineMaterialstainless steelTypelevelingOther characteristicsthreaded, anchorable, with mounting holes
