The 91150-KG5 Reference Cell and Meter is an integral part of solar simulator calibration and solar cell I-V characterization. It consists of a readout device and a 2 x 2 cm calibrated solar cell made of monocrystalline silicon with KG5 window. The cell is also equipped with a thermocouple assembled in accordance with IEC 60904-2. The certification is accredited by NIST to the ISO-17025 standard and is traceable both to the National Renewable Energy Laboratory (NREL), and to the International System of Units (SI). It reads solar simulator irradiance in sun units, one sun is equal to 1000 W/m2 at 25 C and Airmass 1.5 Global Reference. This tools primary use is the testing of photovoltaic cells under standard conditions. The Readout Meter includes two BNC connectors for analog outputs for the sun irradiance and the temperature.
Технические характеристики
- Autoranging Swithces to higher display range above 1.95 Sun, lower range below 1.90 Sun
- Resolution Irradiance: 0.0001 Sun @ 0-1.9500 Sun (low display range), 0.001 Sun @ 1.900-3.500 Sun (high display range)
Temperature: 0.01 °C - Sampling Rate 2 readings/sec
- Settling Time within 1 sec for
- Range Irradiance: 0-3.500 Sun
Temperature: 0-199.9 °C capable - Operating Temperature Range 10-40 °C
- Operating Humidity 0-90% relative humidity, non-condensing
- Electrical Interface Type K connector for thermocouple integrated beneath the PV reference cell
Amphenol T 3302 009 4-pin connector for reference cell 4-wire interface
Analog output BNC jacks for Sun and temperature output - Dimensions Meter: 151 x 95 x 178 mm
Reference cell: 70 x 16 x 92 mm - Weight 1.8 kg (meter)
