Speed, power and low environmental impact thanks to the synergy of two natural forces The Heart of the System: The Thrust Unit The Alfamatic power units AP and AX are the engine of the OP presses. They consist of an air cylinder and a built-in hydraulic intensifier. As a result, the full stroke can be subdivided into two separate phases: a low pressure fast approach stroke — when the moving ram meets a resistance, at any point during its travel, the power stroke is engaged automatically, a power stroke where thrust is increased through the hydropneumatic intensifier. The Advantages PRODUCTIVITY With pneumatic approach and return and hydraulic pressing stroke, they guarantee reduced cycle times for unparalleled productivity. ENERGY SAVING The pneumatic / hydraulic separation allows to consume energy only when needed. SILENCE There are no hydraulic power units always in operation, for maximum comfort of use for the operator. VERSATILITY OF USE Many sizes and versions for a press cut to size of application. MAXIMUM SECURITY All the presses comply with the current strict accident prevention regulations. They are safe and ready to use. C-frame Structure Monolithic C-shaped structure with low bending. It is the most suitable structure when space is needed in a transversal sense. In steel Fe 430 B UNI 7070, with surfaces protected by high resistance multilayer painting.
Технические характеристики
CharacteristicsOperationhydraulic, pneumaticFunctionbending, straightening, drawing, compression, cutting, assembly, trimming, markingStructureram, C-frameOther characteristicsimpact, low-pressureForce
Min.: 14.5 kN
Max.: 420 kN
Stroke
115 mm (5 in)
Max. pressure
6 bar (87 psi)
