Three Piece Drive Shaft Balancing Machines 1.Specially designed brackets transmit mechanical force with high rigidity 2.Durable and reliable sensor possesses high sensitivity 3.Permanent calibration brings high accuracy with a permission of large initial unbalance amount 4.Advanced electrical measuring system and friendly man-machine interface 5.PHC Series drive shaft balancing machine is the special equipment used to check all kinds of drive shaft balance Technical data at a glance — PHCF-100 — PHCF-350 Max Mass of Workpiece (kg) — 100 — 350 Effective length of workpiece(mm) — 4000 — 4000 Max Diameter of Workpiece(mm) — Φ130 — Φ130 Shaft tube diameter of workpiece(mm) — Ø120 — Ø120 Balancing speed(mm) — 32001) — 32001) Motor Power(KW) — 2.22) — 2.22) Universal joint torque(N.M) — 60 — 60 Min Achievable Residual Unbalance Amount(e mar ) — ≤2.5g — ≤2.5g Length of bed (mm) — 7000 — 7000 Once reduced rate (%) — ≥90 — ≥90 1)Stepless speed regulation 2)Frequency conversion
Технические характеристики
CharacteristicsOrientationhorizontalTypehard bearingApplicationsfor shafts, for propeller shaftsOther characteristicshigh-accuracy, modular, two-planeRotational speed
3,200 rpm (20,106 rad.min-1)
Weight on rotor
Max.: 350 kg (771.6 lb)
Min.: 60 kg (132.3 lb)
