Features:
- AC Hipot Tester
- AC Output Voltage: Range: 0.1KV to 5KV AC, in 2V steps
- Frequency: 50/60 Hz selectable
- Frequency Accuracy: 100ppm
- Waveform: Sinusoidal, crest factor 1.4
- Regulation: +/-(1% of setting + 5V)
- Measurement of Real, Imaginary and Total Current
- Ground Fault Interruption (GFI) for operator safety
- Programmable Ramp, Test and Fall Times
- Storage of Tests Setups, 25 User (5 predefined), and 9 Multi-step with 3 steps per measurement
- Continuous Leakage Current Monitoring down to 0.1µA
- Ground Continuity Test with Adjustable Limits
- Password Protected Front Panel Lockout
- RS-232 standard, Remote I/O, IEEE-488, and enhanced remote options
- Review of Data after Measurement
- Insulation Resistance Measurements from 10kV to 2TV
The Guardian 2500 Series of Hipot Testers is designed to perform the most common electrical safety tests outlined in UL, TUV, IEC and other standards.
Emphasis has been placed on ease of use, automation, rugged reliability and safety, making the Guardian 2500 Series «The Safest Choice» in electrical safety testers.
The Guardian 2510 AC Hipot Tester performs AC dielectric withstand (hipot) tests. The test voltage is programmable in the range from 100VAC to 5KVAC with low and high current detection limits from 1µA to 15mA. The capability of measuring and displaying real, imaginary and total current makes the unit ideal for testing capacitive type devices, such as power supplies, cables and transformers, where the imaginary part of the total current may be significantly higher than the real part.
Технические характеристики
| Manufacturer | QuadTech |
|---|---|
| Condition | Used |
