Gear pump designed for sub-base mount Gear pumps up to 3 litres flow rate and a maximum pumping pressure of 35 bar. This pump is designed for a sub-base mount. ADVANTAGES — Economical through closed circuit — Environmentally friendly — Function monitoring LUBRICATION SYSTEM This lubrication system is preferably used, if an additional cooling and cleaning of the lubrication point is requested. In this lubrication system, after the supply to the lubrication point, oil is led back to the lubrication unit and reused. Due to this impurities are removed and very high temperatures are avoided. The closed oil circuit supports such an environmentally friendly and economical lubrication system. A screw spindle or gear pump dispenses the oil from the tank via a pressure filter to the distributors. The desired oil quantity can be fed to the lubrication points via flow regulators or throttles. Pressure switch, flow regulators with electrical monitoring, temperature sensors and circulation controls are used for monitoring. APPLICATION For lubricating and cooling supports and gearboxes. Key features: — Operating pressure: 35 bar — Temperature: from 0 to 80 °C — Lubricant: oil 20 to 750 mm²/s — Protection grade: IP44 — Type of drive: electrical
Технические характеристики
CharacteristicsFluidfor coolant, oilOperationelectricPrimingnormal primingTechnologygearMobilitystationaryDomainindustrialApplicationscooling, for lubrication, for lubrication units, for lubrication systemsFluid specificationfor mineral oilVoltage400VOther characteristicscompactFlow
Max.: 3 l/min (0.79252 us gal/min)
Min.: 0.06 l/min (0.01585 us gal/min)
Pressure
35 bar (507.632 psi)
Power
Max.: 0.55 kW (0.75 hp)
Min.: 0.18 kW (0.24 hp)
Fluid temperature
Max.: 80 °C (176 °F)
Min.: 0 °C (32 °F)
Input diameter
0.3 in, 0.4 in
Output diameter
0.3 in
