The V series offers a wide array of precision universal joints that are equipped with needle bearings and hardened bushes. These type of joints are capable of delivering maximum speed in accurate performances. They are specially designed to connect and transmit off-center mechanism in the most cost-effective way. These universal joints are fabricated to adopt to a full range of power and speed operations on new machines. Models of the series are used for medium-low speed and limited torque transmission, and are fabricated from stainless steel. These joints are available in several versions, such as single joints, single joints with quick release, and slip shafts with V series joints. Standard dimensions for each joint is available upon request.
Технические характеристики
CharacteristicsConfigurationdouble, singleOther characteristicsprecisionDiameter
Max.: 50 mm (1.97 in)
Min.: 8 mm (0.31 in)
Operating angle
Max.: 45 °
Min.: 0 °
Speed
Max.: 4,000 rpm (25,132.7 rad.min-1)
Min.: 250 rpm (1,570.8 rad.min-1)
