Specification:
| Part Number | 1068257 |
| Ambient operating temperature: | -25 °C … +75 °C |
| Housing material: | Metal, Nickel-plated brass |
| F: | 64 mm |
| Stainless steel (V2A, 304): | Ca. 0.8 |
| D: | 24 mm |
| Repeatability: | ≤ 2 % |
| Output function: | NO |
| Installation type: | Non-flush |
| B: | 24 mm |
| Enclosure rating: | IP 67 |
| Cable material: | Oil-resistant PVC |
| Temperature drift (of Sr): | ± 10 % |
| Thread length: | 43 mm |
| Tightening torque, max.: | Typ. 12 Nm |
| Carbon steel St37 (Fe): | 1 |
| Power-up pulse: | ≤ 5 ms |
| Time delay before availability: | ≤ 100 ms |
| Shock/vibration: | 30 g, 11 ms/10 Hz … 55 Hz, 1 mm |
| Power-up pulse protection: | — |
| Power consumption: | ≤ 10 mA |
| Copper (Cu): | Ca. 0.4 |
| Off-state current: | ≤ 0.8 mA |
| Voltage drop: | ≤ 4 V, ≤ 4.5 V |
| Aluminum (Al): | Ca. 0.45 |
| Hysteresis: | 5 % … 15 % |
| Electrical wiring: | DC 2-wire |
| Switching frequency: | ± 2,000 Hz |
| Assured sensing range Sa: | 6.48 mm |
| Load resistance, min.: | 3 mA |
| Remark: | Associated graphic see «Installation» |
| Brass (Br): | Ca. 0.4 |
| Sensing range Sn: | 8 mm |
| Housing: | Standard |
| Housing length: | 65 mm |
| A: | 12 mm |
| Short-circuit protection: | + |
| E: | 16 mm |
| Reverse polarity protection: | + |
| Ripple: | ≤ 10 % |
| C: | 12 mm |
| Housing cap material: | Plastic, PA6 |
| Thread size: | M12 x 1 |
| Connection type: | Cable, 2-wire, 2 m |
| Design: | Cylindrical |
| EMC: | According to EN 60947-5-2 |
| Supply voltage: | 10 V DC … 30 V DC |
| Note: | The values are reference values which may vary |
| Output current Ia: | ≤ 100 mA |
Part Number: 1068257.
Ambient operating temperature ranges from -25 °C to +75 °C.
The housing is made of metal with nickel-plated brass. Dimensions include F: 64 mm, D: 24 mm, B: 24 mm. The enclosure rating is IP 67.
The cable material is oil-resistant PVC. Temperature drift (of Sr) is ± 10 %. The thread length is 43 mm. Maximum tightening torque is typically 12 Nm.
For carbon steel St37 (Fe), the value is 1. The power-up pulse is ≤ 5 ms. The time delay before availability is ≤ 100 ms. Shock/vibration resistance is 30 g, 11 ms/10 Hz … 55 Hz, 1 mm. Power-up pulse protection is not available (-).
Power consumption is ≤ 10 mA. For copper (Cu), the value is approx. 0.4. Off-state current is ≤ 0.8 mA. Voltage drop is ≤ 4 V, ≤ 4.5 V. For aluminum (Al), the value is approx. 0.45.
Hysteresis is between 5 % and 15 %. Electrical wiring is DC 2-wire. Switching frequency is ± 2,000 Hz. Assured sensing range Sa is 6.48 mm. Minimum load resistance is 3 mA.
Note: The values are reference values which may vary. Associated graphic is available under «Installation». Brass (Br) value is approx. 0.4. Sensing range Sn is 8 mm.
Housing is standard type with a housing length of 65 mm. A: 12 mm, E: 16 mm. Short-circuit protection is enabled (+). Reverse polarity protection is enabled (+).
Ripple is ≤ 10 %. Housing cap material is plastic (PA6). Thread size is M12 x 1. Connection type is cable, 2-wire, 2 m long. Design is cylindrical. EMC compliance is according to EN 60947-5-2.
Supply voltage is from 10 V DC to 30 V DC. Output current Ia is ≤ 100 mA.
