Specification:
| Part Number | 1025501 |
| Technology: | Sender/receiver |
| Enclosure rating: | IP 65 |
| Test input: | PNP |
| Output current Imax.: | 100 mA |
| Minimum detectable object (MDO): | Parallel beam: ≥ 35 mm … 65 mm |
| Response time : | Parallel beam 100 ms |
| Output load inductive: | 1 H |
| Housing material: | Aluminum |
| Switching frequency: | 250 kHz |
| Circuit protection: | Output Q short-circuit protected Interference suppression VS connections reverse-polarity protected |
| Protection class: | III |
| Indication: | LED |
| Vibration resistance: | 5 g, 10 Hz … 55 Hz (IEC 68-2-6) |
| Evaluation beams: | Parallel beam |
| Ripple: | |
| Power consumption receiver : | |
| Switching output: | 2 x PNP (Q and /Q) |
| Ambient light safety: | Indirect: ≤ 150,000 lx |
| Supply voltage Vs : | DC 15 V … 30 V |
| Wave length: | 880 nm |
| Front screen: | PMMA |
| Task: | Switching light grid |
| Synchronization: | Optical |
| Beam separation: | 30 mm |
| Initialization time: | 1 s |
| Output load capacitive: | 100 nF |
| Ambient temperature: | Operation: -25 … +55 °C Storage: -40 … +70 °C |
| EMC: | EN 60947-5-2 |
| Maximum range: | 3 m |
| Output mode : | Q dark switching |
| Minimum range: | ≥0 mm |
| Dimensions (W x H x D): | 34 mm x 646 mm x 29 mm |
| Working range: | 2 m |
| Power consumption sender : | |
| Connection type: | Connector M12, 4-pin |
| Number of beams: | 20 |
| Weight: | 1,800 g |
| Shock load: | 10 g / DIN EN 60068-2-29 / 16 ms |
| Detection height: | 570 mm |
