New TAIFUJet® series, Air booster nozzles, Compact, Shorter body (35mm long) compared to the conventional TAIFUJet 42mm wide type with the same performance. Features — This compact air nozzle (42 mm wide, 35 mm long) is suitable for applications where flat blowing is required in tight spaces. — The orifices come in different diameters, 0.8*, 1.0, or 1.2* mm (*only metal type). — Low-noise level. Plastic:79 dBA, Metal:73–82 dBA (at 0.3 MPa) — Suitable for smaller equipment and cost reduction. — NPT and PT thread type are available [Max. air pressure] Plastic TF-FS: 0.7 MPa (100 psi), Stainless steel TF-FS: 1.0 MPa (140 psi) [Max. allowable temperature] Plastic TF-FS: 120℃ (245ﾟF), Stainless steel TF-FS: 400℃ (750ﾟF) Applications — Blow-off drying: Blow-off drying after washing, Edge wiper for steel surface treatment, Blow-off drying for engine block — Blowing off dust/paint dust, Rejection of inferior products, Blowing off dust for steel plate — Cooling: Pinpoint cooling for molded plastic Industries in which this nozzle is used — Steelmaking — Machinery — Electronics — Paper & Pulp — Printing — Food — Automotive Structure — Flat air nozzle with 35 mm long and 42 mm wide body. Material — Plastic (PPS) or Stainless steel 316L equivalent 1/4M (PT) TF-FS 42-16-010 PPS 1/4M (NPT) TF-FS 42-16-010 PPS
Технические характеристики
CharacteristicsFunctionblow-off, for dryingMediaairMaterialplastic, inoxOther characteristicscompactOrifice diameter
0.8 mm, 1 mm, 2 mm (0.031 in)
