| 11701724 | |
| Sensor | Sony IMX255 Gen2 |
| Mono/Color | Mono |
| Sensor type | 1″ CMOS |
| Shutter type | Global shutter |
| Resolution | 4096 x 2160 px |
| Pixel size | 3.45 x 3.45 µm |
| Exposure time | 0.001 … 60000 ms |
| Dark noise | 2.11 e- |
| Saturation capacity | 9165 e- |
| Dynamic range | 70.4 dB |
| Signal-to-noise ratio | 39.6 dB |
| Quantum efficiency | 64.4 % @ 536 nm |
| Image formats, interface frame rate max. | Full Frame, 4096 x 2160 px, max. 95 fps Binning 2×2, 2048 x 1080 px, max. 184 fps Binning 2×1, 2048 x 2160 px, max. 95 fps Binning 1×2, 4096 x 1080 px, max. 95 fps |
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 4096 x 2160 px, max. 95 fps |
| Pixel formats | Mono8 Mono10 Mono12 Mono12 Packed |
| Analog controls | Gain (0 … 48 dB) Offset (0 … 255 LSB 12 Bit) |
| Color models | Mono |
| Image processing | JPEG |
| Basic Functions | Exposure Gain / Color Gain Trigger / Exposure Active (Flash) Binning 2×2 Partial Scan Offset Free Running Mode (Live Image) Multi ROI |
| Auto Functions | Exposure Auto Gain Auto |
| Image Pre-processing | Image Flipping (X/Y) LUT / Gamma Shading Correction JPEG Image Compression Edge Sharpening Noise Reduction |
| Acquisition / Interface | Burst Mode Adjustable Framerate Short Exposure Time Enable Device Link Throughput Limit Internal Image Buffer |
| Synchronization | free running trigger |
| Trigger sources | Hardware Software ActionCommand |
| Trigger delay | 0 … 2 sec, tracking and buffering of up to 256 trigger signals |
| Process Synchronization | Events Timer Trigger Delay Debouncer Counter Sequencer Trigger via Action CMD (GigE) Action CMD Request ID Trigger ID inside Chunk Additional Output Modes (e.g. Trigger Ready) PWM (PWM Duration / PWM Duty Cycle) Selectable Output format (e.g. Tri State, Push Pull) Chunk data inside transferred image Encoder support via Counter End trigger source 4 power outputs with up to 120 W (max. 48 V / 2.5 A) |
| Time synchronization IEEE 1588 | IEEE 1588 / Master and Slave function IEEE 1588 / Scheduled Action CMD IEEE 1588 / Synchronized Acquisition Framerate |
| Additional Functions | User Set Integrated temperature sensor Readable additional information (e.g. sensor information) Save Custom Data |
| Lens control | Corning liquid lens |
| Sequencer | Automated control for series of images using different sets of parameters |
| Sequencer parameter | Exposure time gain factor output line ROI Offset x ROI Offset y |
| Internal image buffer | 1024 MB 117 images (Trigger Mode) 1 image (Free Running Mode) |
| Data interface | 10 Gigabit Ethernet, Transfer rate 10000 Mbits/sec Gigabit Ethernet, Transfer rate 1000 Mbits/sec Fast Ethernet, Transfer rate 100 Mbits/sec Connector: M12 / 8-pol x-coded (SACC-CI-M12FS-8CON-L180-10G) |
| Process interface | M12 / 12 pins a-coded (SACC-CI-M12MS-12CON-L180) |
| Power supply | via M12/12 pins a-coded |
| Lens mount | C-mount |
| Width | 60 mm |
| Height | 60 mm |
| Depth | 99.7 mm |
| Weight | ≈ 485 g |
| Material | aluminum |
| Voltage supply range +Vs | 19.2 … 28.8 V DC (external power supply) |
| Power consumption | approx. 10.5 W @ 24 VDC and 95 fps |
| Flash memory size | 128 kB |
| Operating temperature | 0 … +60 °C @ T = measurement point |
| Humidity | 10 … 90 % (non-condensing) |
| Protection class | IP 40 IP 54 (with mounted tube and cable) IP 65 (with mounted tube and cable) IP 67 (with mounted tube and cable) |
| Lines | 2 input lines 4 power output lines with pulse width modulation (PWM) (max. 48 V / max. 2,5 A) RS232 |
| Conformity | CE RoHS EAC UL recognized |
This device features a Sony IMX255 Gen2 sensor with a resolution of 4096 x 2160 pixels and a pixel size of 3.45 x 3.45 µm. It operates in monochrome mode and utilizes a global shutter type.
The sensor has a dynamic range of 70.4 dB and a signal-to-noise ratio of 39.6 dB. The exposure time can be set from 0.001 ms to 60000 ms. Dark noise is 2.11 e-, and saturation capacity is 9165 e-. Quantum efficiency is 64.4% at 536 nm.
The device supports various image formats and interface frame rates, including Full Frame at 4096 x 2160 px up to 95 fps, and binning modes (2×2, 2×1, 1×2) which can increase frame rates. Burst mode allows for a maximum of 95 fps at 4096 x 2160 px. Supported pixel formats include Mono8, Mono10, Mono12, and Mono12 Packed. Analog controls include gain (0-48 dB) and offset (0-255 LSB 12 Bit).
Additional functions include image processing (JPEG), basic functions like exposure and gain control, binning, partial scan, and multi ROI. Image pre-processing capabilities include flipping, LUT/Gamma correction, shading correction, JPEG compression, edge sharpening, and noise reduction. Acquisition and interface features include burst mode, adjustable framerate, and an internal image buffer of 1024 MB.
Synchronization options include free running, trigger (hardware, software, ActionCommand), with a trigger delay adjustable from 0 to 2 seconds and buffering for up to 256 signals. Process synchronization supports events, timers, debouncers, sequencers, and PWM outputs. Time synchronization is handled via IEEE 1588, supporting master/slave functions and synchronized acquisition framerates. The device also supports lens control via a Corning liquid lens and has a sequencer for automated image series control.
The data interface is 10 Gigabit Ethernet with transfer rates of 10000 Mbits/sec, also supporting Gigabit Ethernet (1000 Mbits/sec) and Fast Ethernet (100 Mbits/sec), utilizing an M12 / 8-pin connector. The process interface uses an M12 / 12-pin connector. Power is supplied via the M12/12-pin connector with a voltage range of 19.2 to 28.8 V DC. The lens mount is C-mount.
Physical dimensions are 60 mm width, 60 mm height, and 99.7 mm depth, with a weight of approximately 485 g. The casing is made of aluminum. Power consumption is approximately 10.5 W at 24 VDC and 95 fps. The operating temperature range is 0 to +60 °C, with humidity tolerance from 10 to 90% (non-condensing). Protection classes include IP40, IP54, IP65, and IP67 (depending on mounted accessories). The device has 2 input lines and 4 power output lines with PWM capabilities, as well as RS232 communication. It holds CE, RoHS, EAC, and UL certifications.
