USB 3.0, 12,3 Megapixel, Monochrome
| Baumer Article no | 11165898 |
| Sensor | Sony IMX253 Gen2 |
| Mono/Color | Mono |
| Sensor type | 1.1″ CMOS |
| Shutter type | Global shutter |
| Resolution | 4096 x 3000 px |
| Pixel size | 3.45 x 3.45 µm |
| Exposure time | 0.001 … 60000 ms |
| Dark noise | 2.2 e- |
| Saturation capacity | 10179 e- |
| Dynamic range | 71 dB |
| Signal-to-noise ratio | 40.1 dB |
| Quantum efficiency | 65.4 % @ 536 nm |
| Image formats, interface frame rate max. | Full Frame, 4096 x 3000 px, max. 30 fpsBinning 2×2, 2048 x 1500 px, max. 116 fpsBinning 2×1, 2048 x 3000 px, max. 31 fpsBinning 1×2, 4096 x 1500 px, max. 31 fps |
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 4096 x 3000 px, max. 31 fps |
| Pixel formats | Mono8Mono10Mono12Mono12 Packed |
| Analog controls | Gain (0 … 48 dB)Offset (0 … 255 LSB 12 Bit) |
| Color models | Mono |
| Basic Functions | ExposureGain Trigger / Exposure Active (Flash)Binning 2x2Partial ScanOffsetFree Running Mode (Live Image) |
| Auto Functions | Exposure AutoGain Auto |
| Image Pre-processing | Image Flipping (X/Y)LUT / Gamma |
| Acquisition / Interface | Burst Mode Adjustable FramerateShort Exposure Time EnableDevice Link Throughput LimitInternal Image Buffer |
| Synchronization | free running trigger |
| Trigger sources | HardwareSoftware |
| Trigger delay | 0 … 2 sec, tracking and buffering of up to 256 trigger signals |
| Process Synchronization | EventsTimerTrigger DelayDebouncerCounterSequencerTrigger via Action CMD (GigE)Additional Output Modes (e.g. Trigger Ready)Chunk data inside transferred imageEncoder support via Counter End trigger source |
| Additional Functions | User SetIntegrated temperature sensorReadable additional information (e.g. sensor information)Save Custom Data |
| Internal image buffer | 458 MB13 images (Trigger Mode)1 image (Free Running Mode) |
| Data interface | USB 3.0, Transfer Rate 5000 Mbits/sec, Connector: USB 3.0 Micro B |
| Process interface | M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180) |
| Power supply | via USB 3.0 interface |
| Lens mount | C-mount |
| Width | 29 mm |
| Height | 29 mm |
| Depth | 38 mm |
| Weight | ? 90 g |
| Material | zinc die casting, baked varnish (until 02-2020 nickel-chrome-plated), IP 40 |
| Power consumption | approx. 3,7 W @ 30 fps |
| Operating voltage | 5 VDC (via USB3.0 interface) |
| Flash memory size | 128 kB |
| Operating temperature | 0 … +65 ° @ T = measurement point |
| Humidity | 10 … 90 % (non-condensing) |
| Protection class | IP 40 |
| Lines | 1 input line1 output line2 general purpose lines |
| Conformity | CERoHSEACBIS-CRS (R-41207004) |
