Gigabit Ethernet, 0,4 Megapixel, Monochrome
| 11183216 | |
| Sensor | Sony IMX287 Gen2 |
| Mono/Color | Mono |
| Sensor type | 1/2.9″ CMOS |
| Shutter type | Global shutter |
| Resolution | 720 x 540 px |
| Pixel size | 6.9 x 6.9 µm |
| Exposure time | 0.001 … 60000 ms |
| Dark noise | 3.11 e- |
| Saturation capacity | 9266 e- |
| Dynamic range | 67.9 dB |
| Signal-to-noise ratio | 39.7 dB |
| Quantum efficiency | 64.5 % @ 536 nm |
| Image formats, interface frame rate max. | Full Frame, 720 x 540 px, max. 318 fps; Binning 2×2, 360 x 270 px, max. 439 fps; Binning 2×1, 360 x 540 px, max. 439 fps; Binning 1×2, 360 x 270 px, max. 439 fps |
| Image formats, aquisition frame rate max. (Burst Mode) | Full Frame, 720 x 540 px, max. 444 fps |
| Pixel formats | Mono8, Mono10, Mono12, Mono12 Packed |
| Color models | Mono |
| Basic Functions | Exposure, Gain, Trigger / Exposure Active (Flash), Binning 2×2, Partial Scan, Offset, Free Running Mode (Live Image) |
| Auto Functions | Exposure Auto, Gain Auto |
| Image Pre-processing | Image Flipping (X/Y), LUT / Gamma |
| Acquisition / Interface | Burst Mode, Adjustable Framerate, Short Exposure Time Enable, Device Link Throughput Limit, Internal Image Buffer |
| Synchronization | free running, trigger |
| Trigger sources | Hardware, Software, ActionCommand |
| Trigger delay | 0 … 2 sec, tracking and buffering of up to 256 trigger signals |
| Process Synchronization | Events: Timer, Trigger Delay, Debouncer, Counter, Sequencer; Trigger via Action CMD (GigE); Additional Output Modes (e.g. Trigger Ready); Chunk data inside transferred image; Encoder support via Counter End trigger source |
| Additional Functions | User Set, Integrated temperature sensor, Readable additional information (e.g. sensor information), Save Custom Data |
| Internal image buffer | 9 MB: 8 images (Trigger Mode), 1 image (Free Running Mode) |
| Data interface | Gigabit Ethernet, Transfer rate 1000 Mbits/sec; Fast Ethernet, Transfer Rate 100 Mbits/sec; Connector: 8P8C Modular Jack (RJ45), screwable type |
| Process interface | M8 / 8 pins (SACC-DSI-M8MS-8CON-M8-L180) |
| Power supply | via M8 / 8 pins or Power over Ethernet (PoE) |
| Lens mount | C-mount |
| Width | 29 mm |
| Height | 29 mm |
| Depth | 49 mm |
| Weight | ~120 g |
| Material | Zinc die casting, baked varnish (until 02-2020 nickel-chrome-plated), IP 40 |
| Voltage supply range +Vs | 12 … 24 V DC (external power supply); 36 … 57 V DC (Power over Ethernet) |
| Power consumption | approx. 2,3 W @ 12 VDC and 318 fps; approx. 2,8 W @ 48 VDC (PoE) and 318 fps |
| Flash memory size | 128 kB |
| Operating temperature | 0 … +65 °C @ T = measurement point |
| Humidity | 10 … 90 % (non-condensing) |
| Protection class | IP 40 |
| Lines | 1 input line, 1 output line, 2 general purpose lines |
| Conformity | CE, RoHS, EAC, BIS-CRS (R-41207004) |
