| Baumer Article no | 11199079 |
| Type | Distance measuring |
| Version | IO-Link measuring |
| Measuring distance Sd | 30В …В 250 mm |
| Focal distance | 400 mm |
| Adjustment | Teach-in and IO-Link |
| Power on indication | LED green |
| Light indicator | LED yellow |
| Resolution | 500 … 10000 Вµm |
| Linearity error | В± 1.5 … 12.5 mm |
| Beam type | Point |
| Suppression of reciprocal influence | Yes |
| Alignment optical axis | |
| Temperature drift | |
| Light source | Pulsed red laser diode |
| Wave length | 656 nm |
| Laser class | 1 |
| Response time / release time | |
| Voltage supply range +Vs | 11 … 30 VDC |
| Current consumption max. (no load) | 30 mA |
| Voltage drop Vd | |
| Output circuit | Push-pull |
| Output current | |
| Short circuit protection | Yes |
| Reverse polarity protection | Yes |
| Interface | IO-Link V1.1 |
| Baud rate | 230,4 kBaud (COM 3) |
| Cycle time | ≥ 0.6 ms |
| Process data length | 3 Byte |
| Process data structure | Bit 0 = BDC1Bit 2 = qualityBit 3 = alarmBit 8-23 = 16 Bit measurement |
| Width / diameter | 12.9 mm |
| Height / length | 32.3 mm |
| Depth | 23 mm |
| Type | Rectangular |
| Housing material | Plastic (ASA, PMMA) |
| Front (optics) | PMMA |
| Connection types | Connector M8 4 pin |
| Protection class | IP 67 |
| Operating temperature | -10В …В +60 В°C |
This device is a distance measuring sensor with IO-Link interface. It measures distances within the range of 30 to 250 mm with a focal distance of 400 mm. The adjustment is done via teach-in and IO-Link. The device has a power-on indicator (green LED) and a light indicator (yellow LED).
The resolution of the sensor is between 500 and 10000 Вµm. The linearity error is В± 1.5 to 12.5 mm. It uses a point beam type and supports suppression of reciprocal influence. The light source is a pulsed red laser diode with a wavelength of 656 nm, and it is a class 1 laser. The response time is not specified. The supply voltage range is 11 to 30 VDC, with a maximum current consumption of 30 mA without load. The output circuit is push-pull with short circuit and reverse polarity protection. The interface is IO-Link V1.1 with a baud rate of 230.4 kBaud (COM 3) and a cycle time of less than 0.6 ms. The process data length is 3 Bytes.
The device has a width of 12.9 mm, a height of 32.3 mm, and a depth of 23 mm. The housing is rectangular, made of plastic (ASA, PMMA) with a PMMA front. It connects via an M8 4-pin connector and has an IP 67 protection class. The operating temperature range is -10 to +60 В°C.
