Model PSCOUT2-BASE is the Base Model of the PulseScout2 Autocorrelator family that can measure 20 – 3500 fsec pulses, between 420 – 1600 nm wavelength. This device is not equiped with a detection module. A detection module is required for desired wavelength and sensitivity (i.e. PMT or PD).
The PulseScout2™ autocorrelators are a versatile, easy-to-use diagnostic tool for measuring ultrafast pulses. This autocorrelator family is capable of measuring pulse widths from both high repetition rate (MHz) oscillators and low repetition rate (kHz) amplifiers from visible to IR wavelength range. A photodiode detector module is suitable to detect and measure high-energy amplified pulses, and a photomultiplier detector module is to measure low-energy oscillator pulses. Conveniently, these detector modules are fully interchangeable in seconds. Alignment is straight-forward and can also be done easily even for first time users, making this autocorrelator an ideal diagnostic tool for all of your ultrafast applications. CE compliant.
Технические характеристики
- Analog Output Delay: 0 — 10 V, Signal: 0 — 10 V
- Beam Diameter (1/e2) 2 mm
- CE Certified Yes
- Computer Interface USB 2
- Input Trigger, TTL
- Linearity 1% of Actual Scan Range
- Maximum Pulse Energy 1 J
- Maximum Pulse Rate 10 GHz
- Polarization Linear / Horizontal
- Minimum Optical Power 2 mW
- Maximum Optical Power 250 mW
- Pulse Width 20 — 3500 fs
- Remote Control TCP/IP (SCPI Standard) via Control Software
- Repetition Rate 300 Hz
- Scan Range 150 fs — 15 ps
- Scan Rate 10 Hz
- Spectral Range 420 — 1600 nm
