HERZ– high-pressure blower: Low noise level Maintenance-free Compact design Completely oil-free The operating temperature of the high-pressure blower may not exceed 60°C. Specail version also available with UL cerification On request, the blowers are also available for utilisation with frequency converters for speed control. In this case, motors are provided with a phase separator. On request, the device can be provided with a PTC resistor, whose signal can be analysed using an optional tripping unit. Technical data are not changed. In the standard version the blowers are provided with a stainless steel filter on the intake side, which can be used again after it has been cleaned with compressed air. When a fine filter is used, the stainless steel filter can be removed.
Технические характеристики
CharacteristicsTypeairTechnologyside-channelNumber of stagessingle-stageOther characteristicsoil-free, compact, high-pressureFlow
Min.: 1 m³/min (35.31 ft³/min)
Max.: 2 m³/min (70.63 ft³/min)
Operating pressure
Min.: 14,000 Pa (2.031 psi)
Max.: 14,500 Pa (2.103 psi)
Nominal power
Min.: 0.46 kW (0.625 hp)
Max.: 0.62 kW (0.843 hp)
