HERZ– high-pressure blower: Low noise level Maintenance-free Compact design Completely oil-free The operating temperature of the high-pressure blower may not exceed 60°C. Specail version also available with UL cerification On request, the blowers are also available for utilisation with frequency converters for speed control. In this case, motors are provided with a phase separator. On request, the device can be provided with a PTC resistor, whose signal can be analysed using an optional tripping unit. Technical data are not changed. In the standard version the blowers are provided with a stainless steel filter on the intake side, which can be used again after it has been cleaned with compressed air. When a fine filter is used, the stainless steel filter can be removed.
Технические характеристики
CharacteristicsTypeairTechnologyside-channelNumber of stagessingle-stageOther characteristicsmedium-pressure, oil-free, compact, high-pressureFlow
Max.: 4 m³/min (141.26 ft³/min)
Min.: 4 m³/min (141.26 ft³/min)
Operating pressure
Max.: 27,000 Pa (3.916 psi)
Min.: 26,000 Pa (3.771 psi)
Nominal power
Max.: 2.55 kW (3.467 hp)
Min.: 2.2 kW (2.991 hp)
