Horizontal centrifugal pump to ISO 2858 (EN 22858 (DIN 24256)) and ISO 5199 Standardized and modular design Flanges according to ISO 7005 PN 16 For stainless steel execution 150 lbs ANSI B 16.5 available Outstanding hydraulic performance High efficiency impeller Closed impeller with back vanes providing axial balancing of impeller loads Half open impeller with wear plate and external adjustment Easy maintenance through the Back-Pull-Out principle Single unbalanced / balanced seals to EN 12756 (DIN 24960) Single and double cartridge seals with seal support system Quenched shaft sealing Atex certification Dry-shaft design, pumped liquid not in contact with the shaft Heating jacket optional Robust shaft design Extended life time 2-Deepgroove ball bearings or double row angular contact thrust bearing and cylindrical roller bearing Grease or oil bath lubricated bearings Suitable for Low viscosity, clean or slightly contaminated liquids, especially in the chemical industry
Технические характеристики
CharacteristicsFluidwater, wastewater, for clear water, oil, greaseOperationelectricTechnologycartridgeMobilitystationaryDomainfor the chemical industryApplicationscirculationMaterialstainless steel, cast iron, bronzeFluid specificationfor low-viscosity fluidsProtection levelATEX, robustOther characteristicslubricated, standard, high-efficiency, horizontal mount, single-stage, central aspiration, double, modular, axial, partially-enclosed, with open impeller, with seal, heatingFlow
Min.: 0 m³/h (0 ft³/h)
Max.: 800 m³/h (28,251.73338 ft³/h)
Pressure
Min.: 0 bar (0 psi)
Max.: 16 bar (232.06 psi)
Head
Min.: 0 m (000)
Max.: 160 m (52411)
Fluid temperature
200 °C (392 °F)
