The machine is driven by a vibration motor attached directly to the centre below the screen body. The screen body can vibrate freely and three dimensionally by means of dislocation via precisely adjusted springs. The difference between this model and the KTS tumbler screening machines is the acceleration, which is 3-4 times higher at a comparatively low amplitude. Because the amplitude gets smaller towards the top with each additional screen deck, only 3 decks can be installed per machine. The centrifugal force of the motor can be altered, as can the offset angle between the upper and lower flyweight in order to adjust the retention time of the product on the screens. The machine The machine is driven by a vibration motor attached directly to the centre below the screen body. The screen body can vibrate freely and three dimensionally by means of dislocation via precisely adjusted springs. The difference between this model and the KTS tumbler screening machines is the acceleration, which is 3-4 times higher at a comparatively low amplitude. Because the amplitude gets smaller towards the top with each additional screen deck, only 3 decks can be installed per machine. This machine has the same top section like the tumbler Screening machine particularly suitable for Screening of high value products in the food and pharmacetical sector.
Технические характеристики
CharacteristicsTypevibrating, tumblerMaterialparticleOther characteristicsstainless steel, 3-deckWeight
Max.: 360 kg (794 lb)
Min.: 100 kg (220 lb)
Opening of the mesh
Max.: 20,000 µm (0.8 in)
Min.: 20 µm
Screening surface
0.3 m², 0.4 m², 0.8 m², 1.1 m² (3.2 ft²)
Engine power
Max.: 1,200 W (1.63 hp)
Min.: 240 W (0.33 hp)
Noise level
75 dB
