Поставка оптоэлектронных компонентов ведущих мировых производителей

Углеродные планшеты SEM

Артикул: G053-10

Sign up today and we»ll send you a 10% discount code towards your first purchase. Some restrictions apply.

Carbon (graphite) planchets are ideal substrates for backscattered electron imaging in a SEM. The spectroscopically pure carbon discs provides an excellent conductive, low emission X-ray background free of any characteristic X-ray peaks except carbon. Carbon planchets are preferred over the non-conductive diamond planchets (charging will have negative effects on the analytical results and can distort X-ray mapping and imaging).

For fine powders and imaging applications, vitreous carbon planchets are the best choice. For X-ray applications of larger particles or specimens or for applications where the planchets can not be used again, the carbon (graphite) planchets are adequate.

Spectroscopically pure carbon Grade 1 (graphite) planchets with total impurities equal to or less than 2ppm with each single element 1ppm or less. Trace elements can be Si, Al, Fe, Mg, Ca or B. The carbon discs have a fine ground finish on one side, 0.80µm (32µ inches). All carbon planchets are 1.6mm (1/16″) thick. Sizes from 10 to 32mm diameter to fit all styles of SEM pin and cylinder mounts varying from 10 to 32mm diameter.

The carbon planchets can be cleaned and used again.

G053-10 Carbon planchets, dia. 10mm, for JEOL 10mm mounts G053-10-100 Carbon planchets, dia. 10mm, for JEOL 10mm mounts — BULK G053-12 Carbon planchets, dia. 12.7mm, for pin stubs G053-12-100 Carbon planchets, dia. 12.7mm, for pin stubs — BULK G053-15 Carbon planchets, dia. 15mm, for Hitachi and ISI/ABT/Topcon mounts G053-15-100 Carbon planchets, dia. 15mm, for Hitachi and ISI/ABT/Topcon mounts — BULK G053-18 Carbon planchets, dia. 18mm, for 18mm pin stubs G053-18-100 Carbon planchets, dia. 18mm, for 18mm pin stubs — BULK G053-25 Carbon planchets, dia. 25.4mm, for large pin stubs, JEOL/HITACHI mounts G053-25-100 Carbon planchets, dia. 25.4mm, for large pin stubs, JEOL/HITACHI mounts — BULK G053-32 Carbon planchets, dia. 32mm, for large pin stubs, Hitachi and JEOL mounts G053-32-100 Carbon planchets, dia. 32mm, for large pin stubs, JEOL/HITACHI mounts — BULK


Properties of Grade 1 Carbon Density 1.58 — 1.63 g/cm³ Hardness 30 — 35 Shore Electrical Resistivity 58 — 71 ΩMicrometre Flexural Strength 24 — 31 MPa Tensile Strength 22 MPa Compressive Strength 48 MPa Thermal Expansion 1.9 x 10-6/ deg. C Porosity 28 — 30% Purity Impurities &lt, 2ppm

Технические характеристики

G053-10

G053-10 Углеродные планшеты SEM — товар из ассортимента Laserzz для подбора и поставки под задачи ремонта и комплектации.

Позиция подходит для сценариев замены и закупки под конкретную спецификацию оборудования.

Для корректного выбора сверяйте маркировку, параметры и совместимость с вашей схемой/узлом.

Вопросы и ответы

Как проверить совместимость товара?

Сравните артикул, технические параметры и формат исполнения с требованиями вашей модели оборудования.

Можно ли заказать партию?

Да, для партийных закупок доступны отдельные условия, ориентируйтесь на количество и сроки поставки.