Технические характеристики
| Type number | C13770-50U |
|---|---|
| Imaging device | CMOS image sensor |
| Effective no. of pixels | 2464 (H) × 2056 (V) |
| Cell size | 3.45 μm (H) × 3.45 μm (V) |
| Effective area | 8.50 mm (H) × 7.09 mm (V) |
| Full well capacity | 10 500 electrons (typ.) |
| Readout speed | 40 frames/s (Full resolution) 134 frames/s (2×2 Binning) 3406 frames/s (2×2 Binning, 4 Line Sub-array) |
| Readout noise | 2.3 electrons (rms) typ. (Analog gain 1×) |
| Exposure time | 20.71 μs to 1 s (Internal trigger mode) 20.71 μs to 1 s (External trigger mode: Edge trigger, Start trigger) 1 ms to 1 s (External trigger mode: Level trigger, Synchronous readout trigger) |
| Dynamic range | 4565 : 1 typ.*1 |
| Analog gain | 1× to 15.8× (240 steps) |
| Sub-array | Yes |
| Binning | 2 × 2 *2 |
| External trigger mode | Edge trigger, Level trigger Synchronous readout trigger, Start trigger |
| Trigger delay function | 0 s to 10 s in 1 μs steps |
| Trigger output | Programmable timing outputs Trigger ready output Global exposure timing output Low output, High output |
| Interface | USB 3.0 |
| Connector | USB 3.0 microB type |
| A/D converter | 12 bit |
| Lens mount | C-mount |
| Power supply | Bus Power/DC+8 V to DC+30 V |
| Power consumption | Approx. 4.5 W |
| Ambient operating temperature | 0 ˚C to + 40 ˚C |
| Ambient storage temperature | — 10 ˚C to + 50 ˚C |
| Ambient operating humidity | 30 % to 80 % (with no condensation) |
| Ambient storage humidity | 90 % max. (with no condensation) |
