Built upon standard-setting performance, including high speed, low heat output, imbalance tolerance and low noise, the J-26S X»s vast range of separations only continues to grow, and now with three-phase filtration that further separates sluice materials into solids, liquids and gasses. The addition of the HEPA (high-efficiency particulate arrestance) filter kit makes the instrument BioSafe. The J-26S XP centrifuge has a more impact-resistant lid, full containment barrier and automatic rotor identification. Its ergonomic design—with lower instrument height and hands-free door operation—remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g and run 24 microplates at a time. It automatically detects which rotor is installed and prevents the rotor from running above its maximum-rated speed, and enables quicker, quieter, more energy-efficient runs with better temperature control. The exclusive high-torque, switched reluctance (SR) drive shortens cycle times.
Технические характеристики
Platform | Avanti |
Maximum Speed | 26,000 rpm |
BioSafe | Yes |
Acceleration | Maximum, Slow or Timed (1-10 minutes, 0-500 rpm) |
Deceleration | Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off |
Timed Run | 1 minute-3 hours, Continuous Hold |
Max Capacity Volume Range | 1 — 6 L |
Refrigeration System | Non-CFC, non-ozone depleting refrigerant |
Temperature Range(s) | 10°C — 40°C in 1 degree increments |
Rotor ID | Automatic |
Zonal Capability | Yes |
Pollution Degree | 2 |
Environmental Conditions | -10°C to 40°C in 1° increments |
Installation Category | II |
Software | Virtual Network Computing (VNC), Mobile Fuge app for Apple iOS and Android |
Material(s) | Steel, Plastic |
Finish | Powder Coat Paint |
Weight | 290 kg(639.3 lb) |
Width | 71 cm(28 in) |
Depth | 86.0, 102.0 with air direviter extending cm(86.0, 102.0 with air direviter extending in) |
Height | 86 cm (149 cm with door open) |
Clearances | 7.6 cm (sides) & 16 cm (rear) |
Humidity Restrictions | <, 95% (non-condensing) |
Power Requirements | 220/380 VAC, 50 Hz, 3 Phase |