Description
Description: The Thermo Scientific EASYpure II RF is a batch-fed water purification system designed to provide Type I reagent-grade water with extremely low organic carbon content. It uses a three-stage deionization process combined with a 0.2 micron final filter to polish pretreated water (distilled, deionized, or reverse osmosis) to produce water with a resistivity of up to 18.2 megohms-cm and with a total organic carbon content of less than 10 ppb. Water resistivity is continuously sensed by a resistivity cell and displayed on a digital display. The EASYpure II RF is designed to be a bench mounted unit. If wall mounting is required, contact Technical Services for information on a wall bracket and mounting accessory.
Specifications:
- Dimension Requirements: 12″ W X 19″ D X 18 1/8″ H (30.5 cm X 48.3 cm X 46.0 cm)
- Clearance Requirements: Sides – 4″ (10.1 cm) minimum to allow air flow, Above – 12″ (30.5 cm) minimum for reservoir replenishment
- Storage Reservoir Capacity: Approximately 6.5 liters usable, 7.0 liters total
- Electrical Requirements: 100-240 VAC +5% -10%, 47-63 Hz.
- Resistivity: 18.2MW·cm at 25°C
- Conductivity: 0.055 µS/cm
- Feedwater Source: Pretreated
- Flow Rate: Up to 1L/min.
- Bacterial Content: <,1CFU/mL
- Particles >,0.2µM/mL: <,1 μM/mL
- TOC Monitor with UV Intensity Monitoring: No
- Feed Water Monitoring: No
- Feedwater Pressure: 100psig (6.9 bar)
- Voltage: 100 to 240VAC
- Hertz: 50/60Hz
- Inlet Water Temperature (Metric): 4° to 40°C
- Electrical Requirements: 100 to 240VAC 50/60Hz
