Термоциклер MJ Research PTC-100

Product Description Hot Bonnet heated lid NIST-traceable calibration Produce highly accurate incubations Parallel printer port Power-failure protection Fitted with Peltier-effect heat pumps 14 pre-programmed protocols The MJ Research PTC-100 is a robust thermocycler that provides solutions for various temperature configuration needs. This instrument comes in versions that use of 96-well or 60-well microplates, as well as a heated lid for oil-free operation. The Hot Bonnet heated lid fitted in each unit has a thumbwheel that allows for the convenient adjustment of height and pressure. The modification feature ensures the tight sealing of reaction vessels and microplates during oil-free thermal cycling. The Precise Peltier-effect heat pumps of PTC-100 thermocyclers were crafted to withstand repeated cycling. Any temperature sequence can be cycled up to 10,000 times. The NIST-traceable calibration feature of this instrument allows for the indefinite storing of material at any temperature. As a result, incubation rates are highly accurate. This calibration feature is also responsible for the refrigeration of results after unsupervised runs. Data storage is secured and hassle-free with MJ Research PTC-100 thermocyclers. Memory stores approximately 320 programs, and the cycler comes with 14 pre-programmed protocols. Any sequence of temperatures can be cycled up to 10,000 times. Ramping rates less than maximum can also be specified. Data which were not properly stored due to power interruptions are safe for up to twelve hours with the PTC-100s power-failure protection feature. Thermal range 0100C electronically (with Peltier-effect heat pumps) Accuracy &plusmn,0.5C of programmed target at 60C Thermal homogeneity &plusmn,0.4C well to well within 30 seconds of arrival at 60C 16MS slide block &plusmn,0.4C within 30 seconds of arrival at 90C Ramping rate 60-well block up to 1C/sec 96-well up to 1.2C/sec 96AgV gold/silver block up to 2.5C/sec 16MS Slide Block up to 0.5C/sec Sample Capacity Dimensions (H x W x D) 45 in. x 30 in. x 39 in. 60-well block Sixty x 0.5ml tubes 96-well block, 96AgV gold/silver block 96 x 0.2ml tubes or one 96-well plate 16MS Slide Block Sixteen 25 x 75mm slides and 24 x 0.2ml tubes Line voltage 100240VAC rms (no adjustment needed among voltages within these ranges) Frequency 350W maximum (momentary 4.5 A) Fuses Two 4A, 5 x 20mm (4 ampere) Displays One 2 x 16 LCD alphanumeric display Ports One 25-pin 8-bit parallel interface printer port

Технические характеристики