Технические характеристики
| Type number | C10000-801 |
|---|---|
| Imaging device | Back thinned type |
| Effective number of pixels | 2048 (H)×128 (V) |
| Cell size | 12 μm (H)×12 μm (V) |
| Effective area | 24.58 mm (H)×1.536 mm (V) |
| Readout mode | TDI readout mode / frame readout mode*1 |
| TDI transfer direction | Bidirectional transfer |
| TDI output channel | 4 TAP (512×128) |
| Anti-blooming | Yes (100 times of the full well capacity) |
| TDI pixel clock rate | 30 MHz |
| TDI line rate | 0.457 kHz to 50 kHz |
| TDI line rate control | Internal setting by serial command*2 / External trigger |
| Full well capacity | 80 000 electrons (typ.) |
| Readout noise | 50 electrons rms (typ.) |
| Dynamic range | 1600:1 |
| Binning | 2×2, 4×4 |
| Analog gain | 1 time to 5 times (16 steps) |
| A/D converter | 12 bit/8 bit*3 |
| Image processing | Real-time shading correction / Back ground subtraction |
| Interface | Camera Link base configuration |
| Camera control | Serial control in Camera Link |
| Camera output clock | 60 MHz |
| Camera output channel | 2 TAP (1024×128) |
| Connector | Mini-Camera Link (SDR)×1 |
| Lens mount | F-mount |
| Power requirements | AC100 V to AC240 V, 50 Hz/60 Hz |
| Power consumption | Approx. 55 VA |
| Ambient operating temperature | 0 ℃ to +40 ℃ |
| Ambient storage temperature | -10 ℃ to +50 ℃ |
| Ambient operating/storage humidity | 90 % or less (with no condensation) |
| Ambient operating humidity | 30 % to 70 % (with no condensation) |
