The M-UTR46S Precision Low-Profile Metric Rotation Stage is ideal for ±2° fine-tuning angular orientation of any component after rotating it to an approximate angle. Ball bearings are preloaded in precision-ground, tool steel races for a smooth, accurate trajectory with minimum eccentricity. Disengaging the side-mounted clutch knob permits continuous 360° free rotation. Once the approximate angular orientation is obtained, a zero-backlash manual drive provides a fine adjustment of 4°. Scale markings and a vernier on the side of the rotation stage measure angular position with 30 arc min resolution.
Технические характеристики
- Coarse Travel 360°
- Fine Travel 4°
- Diameter 46 mm
- Height 23 mm
- Load Capacity 30 N
- Sensitivity 6 arc sec
- Thread Type M4 and M6
- Material Steel
- Graduations 2°
- Vernier 30 arc min
- Maximum Drive Torque 0.65 Nm
- Maximum Reverse Drive Torque 0.2 Nm
- Resolution 0.5°
- Transverse Stiffness 130 rad/Nm
- Wobble ±100 rad
- Weight 0.3 kg
- Included Actuators Adjustment Screw
- Included Bridles M-BR32
