Achieves the best performance in almost all materials and applications, considerably less feed force required. Up to 60% longer service life, up to 30% faster countersinking. Extremely quiet running, optimal and smooth surface, perfect chip removal. Extremely high wear resistance, applicable for normal and high-performance cutting. No material welding, perfect and smooth surface, extremely high nano-hardness. The newly developed cutting geometry of the ULTIMATECUT enormously reduces the axial and radial forces, which are affecting the tool during the countersinking. The variably running relief grinding was specially developed and ensures a very quiet countersinking procedure and a perfect surface quality, which guarantees the best results. (The new RUnaTEC coating further increases performance). The specially developed flute parameters, such as the angle, the transition radius as well as the extra-wide chip flute, ensure an optimal chip and heat removal and therefore enable a high wear resistance. Furthermore, the new geometry prevents material welding and reduces the countersinking force. Considerably less feed power while countersinking is now necessary. The materials can be handled either with a very high as well as with a very low cutting speed, without loss of quality/loosing quality concerning the result. The ULTIMATECUT achieves the best performance in mostly all applications and materials! Net weight 0.036 kg Shaft diameter 10.00 mm Technical data Number of cutting edges — 3 Coating — RUnaTEC coating Shaft — 3-way clamping surface Cutting direction — right hand cutting Sinking angle — 90° Form — type C 90°
Технические характеристики
CharacteristicsConstructionsolidTypedeburringMaterialHSS, HSS-ETreated materialfor cast iron, for steel, for plastics, for aluminum, for brassOther characteristicshigh-performance, 90° helix angle, with cylindrical shank, taper, DIN 335, cuttingDiameter
Max.: 31 mm (1.22 in)
Min.: 6.3 mm (0.25 in)
Length
Max.: 71 mm (2.8 in)
Min.: 45 mm (1.77 in)
