Поставка оптоэлектронных компонентов ведущих мировых производителей

Soldering furnace HTF seriesannealingdryingsintering

Доставка импортных компонентов по России от 3х недель транспортными компаниями СДЭК, Деловые Линии, Major Express.
Оплата физическими и юридическими лицами безналичным расчетом.
Цена может измениться после запроса у поставщика!
Артикул: HTF series TME арт.: HTF series

The HTF industrial furnace range has maximum operating temperatures of 1600 °C, 1700 °C, or 1800 °C. All models are heated by molybdenum disilicide elements. The HTF industrial furnace is available in usable volumes of 64, 128, 165, 250, 332 and 514 litres. Independent over-temperature protection is fitted as standard for unattended operation. Heat treatment is only possible in air. An additional gas supply, with hand valve and rotameter, can be supplied, which results in a slight modification of the atmosphere that will only suppress the Oxygen level as the system is not sealed. As a result, the HTF is ideal for sintering ceramics and oxide ceramics. If debinding is required before sintering, Carbolite Gero offers a debinding package for the HTF. The debinding package consists of an inlet for preheated air, several gas inlets, and an afterburner. The preheated air is symmetrically purged at several gas inlets into the furnace, which improves temperature uniformity at low temperatures and sample envelopment by the incoming air. All gaseous by-products generated during the debinding process are combusted in an afterburner that is driven by propane gas and compressed air. On completion of debinding, the furnace temperature will increase to begin the sintering process. Application Examples annealing, ceramic injection moulding (CIM), debinding, debinding in air, degassing, drying, sintering, sintering in air, sublimation, synthesis, tempering Standard features Programmable 3216P1 controller Over-temperature protection High quality molybdenum disilicide heating elements

Технические характеристики

CharacteristicsFunctionannealing, sintering, soldering, sublimation, dryingConfigurationchamberHeat sourceelectricOther characteristicsprogrammable, industrialMaximum temperature

1,600 °C, 1,700 °C, 1,800 °C (2,912 °F)

Capacity

Max.: 514 l (135.8 gal)

Min.: 64 l (16.9 gal)

Width

Max.: 7,800 mm (307.09 in)

Min.: 1,000 mm (39.37 in)

Height

Max.: 2,450 mm (96.46 in)

Min.: 1,610 mm (63.39 in)

Depth

Max.: 2,000 mm (78.74 in)

Min.: 945 mm (37.2 in)