10/100/1000T to 100/1000M SFP Industrial Switch Converter w/Wide Range DC/AC Input -Dual speed SFP cage (100/1000MFX) set by DIP Switch -Wide dual input DC range 18~72VDC w/Galvanic isolation -Wide dual input AC range 18V~36VAC w/Galvanic isolation(AC model) -Support auto-sensing LLF by DIP Switch / 10K bytes Jumbo Frames -Ethernet Cop per Port can work as PD mode (-PD model) -Operating Temperature Range from -40°C to 75°C(-E model) -AREMA** part 11.5.1 compliance The Lantech IGC-0101DSFP is an Industrial Converter converting from 10/100/1000BaseT to 100/1000M-FX dual speed. It supports 10K bytes jumbo frame. Auto-sensing LLF and Power Fault LED/relay alarm setting by DIP switch Featured with LLF (Link Loss Forwarding) function, Lantech IPGC-0101DSFP is able to auto cut off connection if one end of connection is down. When copper port disconnects, it will auto turn off fiber port. When fiber port disconnects, it will auto turn off copper port. Smart LLF function alert central side switch immediate remedy action when connection is lost. Power Fault LED and relay alarm can be off by DIP switch. Dual power input from 18V~72VDC/18~36VAC with galvanic isolation IGC-0101DSFP supports dual wide range input from 18V~72VDC and 18~36VAC (AC model) with galvanic isolation that is good for various application including vehicle, railway, solar panel etc. Copper Ethernet Port can work as powered device (PD mode) The copper port can provide the correct classification to power source equipment (PSE) so that the PSE can source the right amount of power to the IGC-0101DSFP-PD.
Технические характеристики
CharacteristicsTypesmartNumber of ports2 portNetworkEthernetMountingDIN rail, DIP, wallOther characteristicsRJ45, single-mode, IP30, multi-modeApplicationsindustrial
