Система Agilent 1200 Quat MWD

Product Description Compact, benchtop design builds on the near flawless 1100 Wide flow range of up to 10 mL/min (at 200 bar) that enables semi-preparative separations Wide selection of autosamplers for full flexibility in injection volumes and sample containers Programmable single &lambda, analysis, 1 signal, 13 Hz data rate GMI offers Training & Installation Packages This system is consists of Agilent Model G1311 quaternary pump Agilent Model G1365D multiple wavelength detector Agilent Model G1322 degasser Agilent Model G1329 autosampler Agilent Model G1316 thermostatted column compartment Agilent 1200 Solvent Tray with 2 solvent bottles Computer Data System with NEW Data (Clarity for Windows 10) Analysis Software New 19 Flat Panel Monitor All cables, keyboard, mouse, & complete performance documentation Like the 1100 series the 1200 model is a workhorse for the demanding needs of any QA/QC lab for the most advanced analytical and method development applications. The heart of any HPLC system is the pump. The 1200 quaternary pump model G1311 is designed for routine method development and high throughput gradient applications for greatest flexibility with multisolvent gradients by accessing up to 4 solvents. Accurate flow rates coupled with low pulsation = awesome The G1314 VWD detector gives you high sensitivity information from 190 to 600 nm The dual-lamp design and the temperature control of the Agilent 1200 Series VWD ensure outstanding sensitivity&hellip,.it will NOT cramp your analytical capability. The 1200 series autosampler typical repeatability and LACK of carryover is astronomically outstanding. Superior injection precision and lowest carryover makes your runs trustworthy day in day out. The 1200 autosamplers provide for precision levels of &lt, 0.5 % RSD over an injection volume range from 0.01 &mu,L to 2000 &mu,L. The unique flow-through design, combined with the external needle wash and optional multiple wash solvents, virtually eliminates carryover, even for highly adsorptive compounds. Performance Specification Agilent 1200 G1311 Series Quaternary Pump Type Specification Hydraulic system Dual plunger in series pump with proprietary servo-controlled variable stroke drive, floating plungers and active inlet valve Setable flow range 0.001 10 ml/min, in 0.001 ml/min increments Flow range 0.2 10.0 ml/min Flow precision 0.07% RSD, or 0.02 min SD whatever is greater, based on retentiontime at constant room temperature Flow accuracy &plusmn, 1% or 10 l/min whatever is greater Pressure Operating range 0 40 MPa (0 400 bar, 0 5880 psi) up to 5 ml/min Operating range 0 20 MPa (0 200 bar, 0 2950 psi) up to 10 ml/min Pressure pulsation less than 2 % amplitude (typically 1 MPa (10 bar) Compressibility compensation User-selectable, based on mobile phase compressibility Recommended pH range 1.0 12.5, solvents with pH less than 2.3 should not contain acids which attack stainless steel Gradient formation Low pressure quaternary mixing/gradient capability using proprietary high-speed proportioning valve Delay volume 800 1100 l, dependent on back pressure Composition Range 0 95 % or 5 100 %, user selectable Composition Precision &lt, 0.2 % RSD, at 0.2 and 1 ml/min Recommended pH range 1.0 12.5, solvents with pH &lt, 2.3 should not contain acids which attack stainless steel Control and data evaluation Agilent control software (e.g. Clarity, ChemStation, EZChrom, OL, etc.) Communications Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready,start, stop and shut-down signals, LAN optional Safety and maintenance Extensive diagnostics, error detection and display (through control module and Agilent Lab Monitor & Diagnostic Software), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Low voltages in major maintenance areas. GLP features Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of seal wear and volume of pumped mobile phase with user-settable limits and feedback messages. Electronic records of maintenance and errors. Housing All materials recyclable Performance Specifications Agilent 1200 G1314 Variable Wavelength Detector Type Specification Detection type Double-beam photometer Light source Deuterium lamp Wavelength range 190600 nm Short term noise (ASTM) &plusmn, 0.75 10-5 AU at 254 nm Drift 3 10-4 AU/hr at 254 nm Linearity &gt, 2 AU (5%) upper limit Wavelength accuracy &plusmn, 1 nm Band width 6.5 nm typical Flow cells Standard: 14-l volume, 10-mm cell path length and 40 bar (588 psi) pressure maximum High pressure: 14-l volume, 10-mm cell path length and 400 bar (5880 psi) pressure maximum Micro: 1-l volume, 5-mm cell path length and 40 bar (588 psi) pressure maximum Semi-micro: 5-l volume, 6-mm cell path length and 40 bar (588 psi) pressure maximum Control and data evaluation Agilent ChemStation for LC Analog outputs Communications Controller-area network (CAN), GPIB, RS-232C, APG Remote: ready, start, stop and shut-down signals, LAN optional Safety and maintenance Extensive diagnostics, error detection and display (through control module and Agilent ChemStation), leak detection, safe leak handling, leak output signal for shutdown of pumping system. Lowvoltages in major maintenance areas. GLP features Early maintenance feedback (EMF) for continuous tracking of instrument usage in terms of lamp burn time with user-settable limits and feedback messages. Electronic records of maintenance and errors. Verification of wavelength accuracy with built-in holmium oxide filter. Housing All materials recyclable.

Технические характеристики