RELAY OUTPUT • 1 or 2 channels • General Features: These units allow to amplifiy signals from NAMUR sensors or contacts. The relay outputs have changeover N.O. + N.C. contacts electrically insulated from each other, from power supply and from all the inputs. When used for NAMUR sensors, the indication of failures is visible with a red LED on the front panel for interruptions or short circuits on the input lines. The configuration dip-switches are easily accessible removing the front panel. Suitable for DIN rail mounting. Technical data: • Supply voltage: see ordering references • Frequency of power supply: DC or 50 — 60 Hz • Power consumption max: see ordering references • Working temperature: — 25 ÷ + 60°C • Storage temperature: — 40 ÷ + 80°C • Degree of protection: IP20 • According to EN60947-5-6 • Electromagnetic compatibility (EMC) according to EN61000-6-2/-4 INPUT PARAMETERS • Switching point to ON: ≥ 1,75 mA • Switching point hysteresis: 0,2 mA • Failure detection thresholds: open circuit detection when I 7,45 mA (Ri
Технические характеристики
CharacteristicsTypesignalSecondary functionswitchingOther characteristicselectronic, with relay output, for sensors, DIN railVoltage
Min.: 24 V
Max.: 260 V
Current
5 A
