Sick M40Z-025020RR0

Sick M40Z-025020RR0

Datasheet:

• Item number: 1200124
• Scanning range: 0.5 m … 7.5 m
• Number of beams: 2
• Distance between beams: 500 mm
• Rating: 10 ms
• Synchronization: Optical sync
• Cap with built-in light indicator: ?
• Type: Type 4 (IEC 61496-1)
• Reliability class: SIL3 (IEC 61508), SILCL3 (EN 62061)
• Category: Category 4 (EN ISO 13849)
• Performance level: PL e (EN ISO 13849)
• PFHd (average probability of dangerous failure per hour): 6.6 x 10^-9 (EN ISO 13849)
• T_M (specified operating time): 20 years (EN ISO 13849)
• Safe state in case of error: At least one OSSD output is in the state AUS (OFF).
• Beam coding: Uncoded
• Restart inhibit: Internal
• External Device Monitor (EDM): Activated
• Configurable status output: Contamination (OWS)
• System connection: M12 connector, 8-pin
• Configuration type: Setting buttons

Indication elements: LEDs, 7-segment indicator

• Indicator light: ?
• Protection class: III (IEC 61140)
• Supply voltage UV: 24 V DC (19.2 V DC … 28.8 V DC)
• Residual ripple: ? 10%
• Current consumption: ? 0.6 A
• Safety outputs (OSSD output switching device): 2 semiconductors with PNP junction, short-circuit proof, cross-circuit monitoring
• Dimensions: See dimensional drawing
• Case cross-section: 52 mm x 55.5 mm
• Protection type: IP65 (EN 60529)
• Operating temperature range: –30 °C … +55 °C
• Storage temperature: –30 °C … +70 °C
• Humidity: 15% … 95%, non-condensing
• Shock resistance: 10 g, 16 ms (IEC 60068-2-29)
• Wavelength: 850 nm
• Allowable cable length: 15 m
• Permissible wire cross-section: ? 0.25 mmІ
• Integration via Flexi Soft safety controller: CANopen

DeviceNet

• EtherCAT^®

EtherNet/IP

• Modbus TCP

PROFIBUS DP

• PROFINET

State “ON”, switching voltage HIGH: 24 V DC. (U_V – 2.25 V DC…U_V)
Off state, switching voltage LOW: ? 2 V DC
Current carrying capacity of the output switching device: ? 500 mA
Housing: Aluminum alloy ALMGSI 0.5, powder coated
Front panel: Polycarbonate, scratch resistant
Beam spacing: 500 mm
Category: Multi-beam light safety barriers
Series: M4000 Standard A/P

---